How to reset the sound and audio settings on THOMSON 32HD5506 Smart TV
Sometimes the sound or audio system of your THOMSON 32HD5506 Smart TV does not work properly.
There may be sound “beeps” from the television, no more sound at all, or the sound of your program is offset from the picture.
In any case, the experience is unpleasant for you! But do not lose patience, it is possible to put the sound on your THOMSON 32HD5506 Smart TV. We will see in this article solutions for each problem stated above.
A “beep” sound from your THOMSON 32HD5506 Smart TV
When you turn on your THOMSON 32HD5506 Smart TV, and use it, a “beep” sound disturbs your evening activity? This happens when a capacitor burns and interferes with the proper operation of your THOMSON 32HD5506 Smart TV. But do not worry, you can change it! Capacitors are electrical components essential to the start-up of an electronic object.
They are made of an insulation and two metal wires.
Be careful, if you do not feel comfortable with the following procedure, bring yourself closer to an expert who will help you for a reasonable price.
Be aware, this is a dangerous operation, and unless you are an expert, we do not advise you to do it yourself! To repair capacitors on THOMSON 32HD5506 Smart TV, you must disassemble to the back of your THOMSON 32HD5506 Smart TV TV and disassemble the protective shell if the capacitors are not already visible.
When you see them, have a pair of pliers, and separate them from the TV. Next, place the capacitors, which you can buy for the price of a baguette in a store, in the right place and with the help of a welder, assemble them to your TV. Wait a few minutes for the capacitors to cool down.
No sound on your THOMSON 32HD5506 Smart TV
The first simple step in this case is to check if your TV, model THOMSON 32HD5506 Smart TV, and decoder are not “mute” or if the sound is not too low on each.
If this is not the problem, check the connections of your SCART or HDMi cable and those of your amps.
If all this does not work, and you do not have amps, try going to the “Menu” of your decoder, and go to “Settings”.
Then select “Picture & Sound”. Continue in “Sound Adjustment”, and deactivate Dolby Digital on the HDMI output by selecting “No”.
The sound must be returned to normal on your THOMSON 32HD5506 Smart TV.
Find all the information about THOMSON 32HD5506 Smart TV in our articles.
Offset sound on THOMSON 32HD5506 Smart TV
You wanted to follow your favorite program when you realized that the sound did not match the image at all. Whether it’s early or late, it’s very disturbing for your viewer experience! Do not worry, here’s how to resize the sound to the image on your TV THOMSON 32HD5506 Smart TV.
Shifted sound from your THOMSON 32HD5506 Smart TV on a channel only
When you have the sound offset to one, see two channels only, it is likely that either these channels are set to a foreign language sound channel.
If you watch a lot of programs in Original Version on your THOMSON 32HD5506 Smart TV, it may be your case.
To fix this, go to the channel with the problem.
Take the remote control of your decoder and press “Menu”, then “Language setting”.
In the “Audio” section displayed on the screen of your THOMSON 32HD5506 Smart TV, select the channel’s original language.
Here it is! The sound is normally set back on the picture!
Sound delay on your THOMSON 32HD5506 Smart TV
Some TVs like your THOMSON 32HD5506 Smart TV have a “Sound delay” option.
If this has been set on your THOMSON 32HD5506 Smart TV, go to the “Menu” of your decoder, and go to “Settings”.
Then select “Picture & Sound”. Continue in “Sound Adjustment”, and deactivate Dolby Digital on the HDMI output by selecting “No”.
The sound must be returned to normal.
To conclude on reseting the sound and audio settings on THOMSON 32HD5506 Smart TV
We have just seen how to reset the sound on TV THOMSON 32HD5506 Smart TV.
However, if you encounter any difficulties, do not hesitate to ask for help from a friend. Or ask for help from a professional who will guide you step by step to reset the audio settings and sound on your THOMSON 32HD5506 Smart TV.
How do I reset my Thomson Smart TV?
How do I get the sound back on my smart TV?
– Check the Speakers setting on the TV.
– Increase the volume of the TV.
– Make sure the MUTE option of the TV isn’t enabled.
– Make sure no headphones are connected to the TV.
– Perform a power reset on the TV.
– If using a set-top box with a volume control, increase the volume of the set-top box.
Why does my smart TV suddenly have no sound?
Turning your TV off and back on again is one of the first things you should do if the volume isn’t working or is stuck. Verify the audio settings.
Make sure that the TV’s audio input settings are on.
Make sure the HDMI cable is connected.
How to Hard Reset THOMSON Smart LED TV – Restore All Default Settings in Thomson TV
5 ancillary questions
Why has my sound stopped working?
Hardware problems can be caused by outdated or malfunctioning drivers.
Make sure your audio driver is up to date and update it if needed.
If that doesn’t work, try uninstalling the audio driver (it will reinstall automatically).
If that doesn’t work, try using the generic audio driver that comes with Windows.
What does it mean when your TV has picture but no sound?
Check the volume on your TV.
It sounds silly, but sometimes just making sure your TV isn’t muted or set to a very low volume will solve the problem.
Most televisions display the sound level on the screen as you adjust the volume; look for that in the corner of the screen as you press your remote’s volume button.
How do I unmute the sound on my TV?
– Verify if issue is affecting all channels or apps.
– Check your cable connections.
– Confirm TV’s audio settings.
How do I get sound back on my Samsung Smart TV?
– Using your TV’s remote, press the Volume up button.
– If you cannot see the volume displayed on the screen, navigate to Settings, then select Sound, and then select Sound Output.
– If your TV is connected to an external device, you can check the volume settings on the device as well.
How do I find audio settings on my TV?
– Use your remote to access the TV’s settings menu, then look for a section called Audio, Sound or something similar.
– At the top of the menu should be a selection of presets such as Movie, User or Standard.
You may also be interested in the following articles:
- THOMSON 65UC6596 TV no longer lights or stays on standby
- How to unlock your THOMSON 40FB5426
- How to reset a normal color on THOMSON 43UC6406 LED Ultra HD
You still have issues? Our team of experts and passionate could help you, feel free to contact us.