How to reset sound and audio settings on SONY KDL48WD650

How to reset the sound and audio settings on SONY KDL48WD650

Sometimes the sound or audio system of your SONY KDL48WD650 does not work properly.

There may be sound “beeps” from the television, no more sound at all, or the sound of your program is offset from the picture.

In any case, the experience is unpleasant for you! But do not lose patience, it is possible to put the sound on your SONY KDL48WD650. We will see in this article solutions for each problem stated above.

A “beep” sound from your SONY KDL48WD650

When you turn on your SONY KDL48WD650, and use it, a “beep” sound disturbs your evening activity? This happens when a capacitor burns and interferes with the proper operation of your SONY KDL48WD650. But do not worry, you can change it! Capacitors are electrical components essential to the start-up of an electronic object.

They are made of an insulation and two metal wires.

Be careful, if you do not feel comfortable with the following procedure, bring yourself closer to an expert who will help you for a reasonable price.

Be aware, this is a dangerous operation, and unless you are an expert, we do not advise you to do it yourself! To repair capacitors on SONY KDL48WD650, you must disassemble to the back of your SONY KDL48WD650 TV and disassemble the protective shell if the capacitors are not already visible.

When you see them, have a pair of pliers, and separate them from the TV. Next, place the capacitors, which you can buy for the price of a baguette in a store, in the right place and with the help of a welder, assemble them to your TV. Wait a few minutes for the capacitors to cool down.

No sound on your SONY KDL48WD650

The first simple step in this case is to check if your TV, model SONY KDL48WD650, and decoder are not “mute” or if the sound is not too low on each.

If this is not the problem, check the connections of your SCART or HDMi cable and those of your amps.

If all this does not work, and you do not have amps, try going to the “Menu” of your decoder, and go to “Settings”.

Then select “Picture & Sound”. Continue in “Sound Adjustment”, and deactivate Dolby Digital on the HDMI output by selecting “No”.

The sound must be returned to normal on your SONY KDL48WD650.

Find all the information about SONY KDL48WD650 in our articles.

Offset sound on SONY KDL48WD650

You wanted to follow your favorite program when you realized that the sound did not match the image at all. Whether it’s early or late, it’s very disturbing for your viewer experience! Do not worry, here’s how to resize the sound to the image on your TV SONY KDL48WD650.

Shifted sound from your SONY KDL48WD650 on a channel only

When you have the sound offset to one, see two channels only, it is likely that either these channels are set to a foreign language sound channel.

If you watch a lot of programs in Original Version on your SONY KDL48WD650, it may be your case.

To fix this, go to the channel with the problem.

Take the remote control of your decoder and press “Menu”, then “Language setting”.

In the “Audio” section displayed on the screen of your SONY KDL48WD650, select the channel’s original language.

Here it is! The sound is normally set back on the picture!

Sound delay on your SONY KDL48WD650

Some TVs like your SONY KDL48WD650 have a “Sound delay” option.

If this has been set on your SONY KDL48WD650, go to the “Menu” of your decoder, and go to “Settings”.

Then select “Picture & Sound”. Continue in “Sound Adjustment”, and deactivate Dolby Digital on the HDMI output by selecting “No”.

The sound must be returned to normal.

To conclude on reseting the sound and audio settings on SONY KDL48WD650

We have just seen how to reset the sound on TV SONY KDL48WD650.

However, if you encounter any difficulties, do not hesitate to ask for help from a friend. Or ask for help from a professional who will guide you step by step to reset the audio settings and sound on your SONY KDL48WD650.

What happened to the sound on my Sony Bravia TV?

Check the volume control. Press MUTING or MUTE or (Mute) or VOL or (Volume) + button to cancel muting.

Press the (Quick Settings) or ACTION MENU button, then select [Speakers] — [TV speakers]. Press the HOME button, then select [Settings] — [Display & Sound] — [Audio output] — [Speakers] — [TV speakers].

How do I change audio settings on Sony TV?

Press the HOME button, then select [Settings] — [Display & Sound] — the desired option.

You can change the following settings.

Adjust settings by input such as the TV or HDMI, and other common settings, to enjoy various sound effects.

You can configure settings such as those below.

How do I reset the sound on my Sony Bravia TV?

How do I reset my sound settings?

Select Start and Settings.

Select System > Sound > Volume mixer.

Select Reset under Reset sound devices and volumes for all apps to the recommended defaults.

Reset tv Sony

8 ancillary questions

How do I Reset my audio settings to default?

– Press Win + I to open the settings menu.
– In the System menu, click on Sound.
– Select Volume mixer.
– Look for the Reset sound devices and volumes for all apps to the recommended defaults, and select Reset.

How do I reset the sound on my Sony Bravia TV?

If the sound is still not as desired, please reset all sound settings pressing Home > Settings > Sound > Reset, and select your preferred sound setting.

5.

In the [Sound] setting, make sure to set [Speakers] to [TV Speakers].

How do I change the sound mode on my Sony?

Press the (Quick Settings) button on the remote control, then select [Settings] — [Display & Sound] — the desired option.

You can change the following settings.

Adjust settings by input such as the TV or HDMI, and other common settings, to enjoy various sound effects.

Which sound mode is best for Sony TV?

Setting Description
——– ——————————————————————–
Standard Optimize sound quality for general content.
Dialog Suitable for spoken dialog.
Cinema Optimize surround sound suitable for movies.
Music Lets you experience dynamic and clear sound, like that of a concert.

How do I Reset my Windows sound settings to default?

– Select Start and Settings.
– Select System.
– Select Sound.
– Select App volume and device preferences under Advanced Sound Options.
– Select Reset under Reset to the Microsoft Recommended defaults.

Where are my sound settings?

– Open your phone’s Settings app.
– Tap Sound & vibration. Default notification sound.
– Choose a sound.
– Tap Save.

Where is the audio button on my iPhone?

When you’re on the phone or listening to songs, movies, or other media on iPhone, you can use the buttons on the side of your device to adjust the audio volume.

Otherwise, the buttons control the volume for the ringer, alerts, and other sound effects.

You can also use Siri to turn the volume up or down.

How do I change the audio mode on my Sony TV?

Press the HOME button, then select [Settings] — [Display & Sound] — the desired option.

You may also be interested in the following articles:

You still have issues? Our team of experts and passionate could help you, feel free to contact us.