How to reset sound and audio settings on SAMSUNG 49M5515

How to reset the sound and audio settings on SAMSUNG 49M5515

Sometimes the sound or audio system of your SAMSUNG 49M5515 does not work properly.

There may be sound “beeps” from the television, no more sound at all, or the sound of your program is offset from the picture.

In any case, the experience is unpleasant for you! But do not lose patience, it is possible to put the sound on your SAMSUNG 49M5515. We will see in this article solutions for each problem stated above.

A “beep” sound from your SAMSUNG 49M5515

When you turn on your SAMSUNG 49M5515, and use it, a “beep” sound disturbs your evening activity? This happens when a capacitor burns and interferes with the proper operation of your SAMSUNG 49M5515. But do not worry, you can change it! Capacitors are electrical components essential to the start-up of an electronic object.

They are made of an insulation and two metal wires.

Be careful, if you do not feel comfortable with the following procedure, bring yourself closer to an expert who will help you for a reasonable price.

Be aware, this is a dangerous operation, and unless you are an expert, we do not advise you to do it yourself! To repair capacitors on SAMSUNG 49M5515, you must disassemble to the back of your SAMSUNG 49M5515 TV and disassemble the protective shell if the capacitors are not already visible.

When you see them, have a pair of pliers, and separate them from the TV. Next, place the capacitors, which you can buy for the price of a baguette in a store, in the right place and with the help of a welder, assemble them to your TV. Wait a few minutes for the capacitors to cool down.

No sound on your SAMSUNG 49M5515

The first simple step in this case is to check if your TV, model SAMSUNG 49M5515, and decoder are not “mute” or if the sound is not too low on each.

If this is not the problem, check the connections of your SCART or HDMi cable and those of your amps.

If all this does not work, and you do not have amps, try going to the “Menu” of your decoder, and go to “Settings”.

Then select “Picture & Sound”. Continue in “Sound Adjustment”, and deactivate Dolby Digital on the HDMI output by selecting “No”.

The sound must be returned to normal on your SAMSUNG 49M5515.

Find all the information about SAMSUNG 49M5515 in our articles.

Offset sound on SAMSUNG 49M5515

You wanted to follow your favorite program when you realized that the sound did not match the image at all. Whether it’s early or late, it’s very disturbing for your viewer experience! Do not worry, here’s how to resize the sound to the image on your TV SAMSUNG 49M5515.

Shifted sound from your SAMSUNG 49M5515 on a channel only

When you have the sound offset to one, see two channels only, it is likely that either these channels are set to a foreign language sound channel.

If you watch a lot of programs in Original Version on your SAMSUNG 49M5515, it may be your case.

To fix this, go to the channel with the problem.

Take the remote control of your decoder and press “Menu”, then “Language setting”.

In the “Audio” section displayed on the screen of your SAMSUNG 49M5515, select the channel’s original language.

Here it is! The sound is normally set back on the picture!

Sound delay on your SAMSUNG 49M5515

Some TVs like your SAMSUNG 49M5515 have a “Sound delay” option.

If this has been set on your SAMSUNG 49M5515, go to the “Menu” of your decoder, and go to “Settings”.

Then select “Picture & Sound”. Continue in “Sound Adjustment”, and deactivate Dolby Digital on the HDMI output by selecting “No”.

The sound must be returned to normal.

To conclude on reseting the sound and audio settings on SAMSUNG 49M5515

We have just seen how to reset the sound on TV SAMSUNG 49M5515.

However, if you encounter any difficulties, do not hesitate to ask for help from a friend. Or ask for help from a professional who will guide you step by step to reset the audio settings and sound on your SAMSUNG 49M5515.

How do I restore the sound on my TV?

– Check the Speakers setting on the TV.
– Increase the volume of the TV.
– Make sure the MUTE option of the TV isn’t enabled.
– Make sure no headphones are connected to the TV.
– Perform a power reset on the TV.
– If using a set-top box with a volume control, increase the volume of the set-top box.

How do you reset all audio settings?

– Press Win + I to open the settings menu.
– In the System menu, click on Sound.
– Select Volume mixer.
– Look for the Reset sound devices and volumes for all apps to the recommended defaults, and select Reset.

How do I restore the sound on my Samsung TV?

On your TV, navigate to Settings, then select Support, and then select Self Diagnosis.

Select Sound Test and wait for the test to finish.

If the test reveals a problem, you can try resetting the sound. From Settings, select Sound, then select Expert Settings, and then select Reset Sound.

How do I reset my Samsung sound settings?

– 1 Press the Home button on your remote control.
– 2 Using the directional pad on your remote, navigate to and select Settings.
– 3 Navigate to and select Sound > Expert Settings.
– 4 Navigate to and select Reset Sound.

Samsung Smart TV: How to Reset Audio/Sound Settings (Fix Audio Issues, No Sound, Delayed, Echoing…

6 ancillary questions

How do you test an input jack?

Plug a guitar into the input jack and play a few notes.

If the amplifier is working properly, the notes should come through clearly.

If the amplifier is not working properly, the input jack will need to be replaced.

How do I check if my audio port is working?

– Unplug any device that is plugged into the jack you want to test.
– Plug the device you will use for testing into the jack.
– Click the “Start Recording” button and turn on any power switches in the device you are using.
– Record sound until the counter on the sound recorder shows about 1:00 (one minute).

How do I Reset my audio port?

Right-click on the headphone device that isn’t working.

Select Enable to make sure it isn’t blocked from playing audio from your computer.

Click the now available Set as Default button. Click the OK button and restart your computer.

How do I unmute my TV?

– Verify if issue is affecting all channels or apps.
– Check your cable connections.
– Confirm TV’s audio settings.

How do I fix my audio ports?

Right-click on your audio driver and select Update Driver.

Click on Search automatically for updated driver software.

If Windows can find an updated driver, it will automatically download and install the update to your computer.

Restart your PC and test if the headphones or headphone jack issue is solved.

How do I reset the sound on my smart TV?

– 1 From Smart Hub panel, Select Settings.
– 2 Select Sound.
– 3 Select Expert Settings.
– 4 Select Reset Sound.
– 5 Select Reset to reset all sound settings.

You may also be interested in the following articles:

You still have issues? Our team of experts and passionate could help you, feel free to contact us.