How to reset the sound and audio settings on QILIVE Q.24161
Sometimes the sound or audio system of your QILIVE Q.24161 does not work properly.
There may be sound “beeps” from the television, no more sound at all, or the sound of your program is offset from the picture.
In any case, the experience is unpleasant for you! But do not lose patience, it is possible to put the sound on your QILIVE Q.24161. We will see in this article solutions for each problem stated above.
A “beep” sound from your QILIVE Q.24161
When you turn on your QILIVE Q.24161, and use it, a “beep” sound disturbs your evening activity? This happens when a capacitor burns and interferes with the proper operation of your QILIVE Q.24161. But do not worry, you can change it! Capacitors are electrical components essential to the start-up of an electronic object.
They are made of an insulation and two metal wires.
Be careful, if you do not feel comfortable with the following procedure, bring yourself closer to an expert who will help you for a reasonable price.
Be aware, this is a dangerous operation, and unless you are an expert, we do not advise you to do it yourself! To repair capacitors on QILIVE Q.24161, you must disassemble to the back of your QILIVE Q.24161 TV and disassemble the protective shell if the capacitors are not already visible.
When you see them, have a pair of pliers, and separate them from the TV. Next, place the capacitors, which you can buy for the price of a baguette in a store, in the right place and with the help of a welder, assemble them to your TV. Wait a few minutes for the capacitors to cool down.
No sound on your QILIVE Q.24161
The first simple step in this case is to check if your TV, model QILIVE Q.24161, and decoder are not “mute” or if the sound is not too low on each.
If this is not the problem, check the connections of your SCART or HDMi cable and those of your amps.
If all this does not work, and you do not have amps, try going to the “Menu” of your decoder, and go to “Settings”.
Then select “Picture & Sound”. Continue in “Sound Adjustment”, and deactivate Dolby Digital on the HDMI output by selecting “No”.
The sound must be returned to normal on your QILIVE Q.24161.
Find all the information about QILIVE Q.24161 in our articles.
Offset sound on QILIVE Q.24161
You wanted to follow your favorite program when you realized that the sound did not match the image at all. Whether it’s early or late, it’s very disturbing for your viewer experience! Do not worry, here’s how to resize the sound to the image on your TV QILIVE Q.24161.
Shifted sound from your QILIVE Q.24161 on a channel only
When you have the sound offset to one, see two channels only, it is likely that either these channels are set to a foreign language sound channel.
If you watch a lot of programs in Original Version on your QILIVE Q.24161, it may be your case.
To fix this, go to the channel with the problem.
Take the remote control of your decoder and press “Menu”, then “Language setting”.
In the “Audio” section displayed on the screen of your QILIVE Q.24161, select the channel’s original language.
Here it is! The sound is normally set back on the picture!
Sound delay on your QILIVE Q.24161
Some TVs like your QILIVE Q.24161 have a “Sound delay” option.
If this has been set on your QILIVE Q.24161, go to the “Menu” of your decoder, and go to “Settings”.
Then select “Picture & Sound”. Continue in “Sound Adjustment”, and deactivate Dolby Digital on the HDMI output by selecting “No”.
The sound must be returned to normal.
To conclude on reseting the sound and audio settings on QILIVE Q.24161
We have just seen how to reset the sound on TV QILIVE Q.24161.
However, if you encounter any difficulties, do not hesitate to ask for help from a friend. Or ask for help from a professional who will guide you step by step to reset the audio settings and sound on your QILIVE Q.24161.
Why is my TV audio not working?
Turning your TV off and back on again is one of the first things you should do if the volume isn’t working or is stuck. Verify the audio settings.
Make sure that the TV’s audio input settings are on.
Make sure the HDMI cable is connected.
How do I restore the sound on my TV?
– Check the Speakers setting on the TV.
– Increase the volume of the TV.
– Make sure the MUTE option of the TV isn’t enabled.
– Make sure no headphones are connected to the TV.
– Perform a power reset on the TV.
– If using a set-top box with a volume control, increase the volume of the set-top box.
Why does my TV volume not work on some channels?
If you have audio on most channels, but have silence on some or all of your local network channels, you may have the Secondary Audio Programming (SAP) turned ON.
The SAP feature allows your TV, VCR or Digital Cable box to tune in a second “track” of audio programming.
Not all channels broadcast SAP signals.
How to connect blutooth devices / speakers / hometheatre to Smart TV
9 ancillary questions
Why does my Smart TV have picture but no sound?
Temporarily unplug all the TV connection cables and reboot the TV set. Sometimes, temporarily unplugging the connected cables might help resolve your TV no sound issue.
This temporary reset works to clear the short-term memory of the television, and also helps to resolve some other issues.
Why does my Samsung TV have picture but no sound?
On your TV, navigate to Settings, then select Support, and then select Self Diagnosis.
Select Sound Test and wait for the test to finish.
If the test reveals a problem, you can try resetting the sound. From Settings, select Sound, then select Expert Settings, and then select Reset Sound.
Why does ABC have no sound?
If ABC isn’t producing sound on your TV, please ensure that this “Visually Impaired Mode” is turned off.
Why can’t I get ABC on my TV?
Check the cable connections between the TV and your video device or receiver.
Change the channel or try a different input device or movie.
The received signal may be weak.
If your TV uses a cable or satellite box, you may need to contact your service provider for further assistance in improving the signal strength.
Why do I have picture but no sound on my TV?
Check the volume on your TV.
It sounds silly, but sometimes just making sure your TV isn’t muted or set to a very low volume will solve the problem.
Most televisions display the sound level on the screen as you adjust the volume; look for that in the corner of the screen as you press your remote’s volume button.
How do I reset the sound on my Samsung TV?
1 Press the Home button on your remote control. 2 Using the directional pad on your remote, navigate to and select Settings.
3 Navigate to and select Sound > Expert Settings.
4 Navigate to and select Reset Sound.
How do I get my TV to play sound through HDMI?
– Prepare an HDMI cable.
– Connect the cable to the TV’s HDMI IN (ARC).
– Connect to the HDMI OUT (TV-ARC) port of the speaker that you want to connect.
– Turn the speakers on that are connected to the TV.
– The TV sound will be played through your external speakers.
Why is my TV audio out not working?
Make sure the optical cable is firmly connected to both the TV and the home theater or stereo system.
Try changing the channel on the TV to another digital broadcast. Go into the Sound or Speakers menu of the TV and select External Speakers or Audio System.
Why is my TV not picking up certain channels?
First check that your TV is set to the correct Source or Input, try changing the Source or Input to AV, TV, Digital TV or DTV if you haven’t already.
If your “No Signal” message is not due to incorrect Source or Input being selected, then it’s most likely caused by a set up or antenna fault.
You may also be interested in the following articles:
- How to set DTT channels on QILIVE Q.49
- How to go online with a QILIVE Q.1127
- How to stop or activate audiodescription on QILIVE Q.1324
You still have issues? Our team of experts and passionate could help you, feel free to contact us.