How to reset sound and audio settings on LG 49UH661V

How to reset the sound and audio settings on LG 49UH661V

Sometimes the sound or audio system of your LG 49UH661V does not work properly.

There may be sound “beeps” from the television, no more sound at all, or the sound of your program is offset from the picture.

In any case, the experience is unpleasant for you! But do not lose patience, it is possible to put the sound on your LG 49UH661V. We will see in this article solutions for each problem stated above.

A “beep” sound from your LG 49UH661V

When you turn on your LG 49UH661V, and use it, a “beep” sound disturbs your evening activity? This happens when a capacitor burns and interferes with the proper operation of your LG 49UH661V. But do not worry, you can change it! Capacitors are electrical components essential to the start-up of an electronic object.

They are made of an insulation and two metal wires.

Be careful, if you do not feel comfortable with the following procedure, bring yourself closer to an expert who will help you for a reasonable price.

Be aware, this is a dangerous operation, and unless you are an expert, we do not advise you to do it yourself! To repair capacitors on LG 49UH661V, you must disassemble to the back of your LG 49UH661V TV and disassemble the protective shell if the capacitors are not already visible.

When you see them, have a pair of pliers, and separate them from the TV. Next, place the capacitors, which you can buy for the price of a baguette in a store, in the right place and with the help of a welder, assemble them to your TV. Wait a few minutes for the capacitors to cool down.

No sound on your LG 49UH661V

The first simple step in this case is to check if your TV, model LG 49UH661V, and decoder are not “mute” or if the sound is not too low on each.

If this is not the problem, check the connections of your SCART or HDMi cable and those of your amps.

If all this does not work, and you do not have amps, try going to the “Menu” of your decoder, and go to “Settings”.

Then select “Picture & Sound”. Continue in “Sound Adjustment”, and deactivate Dolby Digital on the HDMI output by selecting “No”.

The sound must be returned to normal on your LG 49UH661V.

Find all the information about LG 49UH661V in our articles.

Offset sound on LG 49UH661V

You wanted to follow your favorite program when you realized that the sound did not match the image at all. Whether it’s early or late, it’s very disturbing for your viewer experience! Do not worry, here’s how to resize the sound to the image on your TV LG 49UH661V.

Shifted sound from your LG 49UH661V on a channel only

When you have the sound offset to one, see two channels only, it is likely that either these channels are set to a foreign language sound channel.

If you watch a lot of programs in Original Version on your LG 49UH661V, it may be your case.

To fix this, go to the channel with the problem.

Take the remote control of your decoder and press “Menu”, then “Language setting”.

In the “Audio” section displayed on the screen of your LG 49UH661V, select the channel’s original language.

Here it is! The sound is normally set back on the picture!

Sound delay on your LG 49UH661V

Some TVs like your LG 49UH661V have a “Sound delay” option.

If this has been set on your LG 49UH661V, go to the “Menu” of your decoder, and go to “Settings”.

Then select “Picture & Sound”. Continue in “Sound Adjustment”, and deactivate Dolby Digital on the HDMI output by selecting “No”.

The sound must be returned to normal.

To conclude on reseting the sound and audio settings on LG 49UH661V

We have just seen how to reset the sound on TV LG 49UH661V.

However, if you encounter any difficulties, do not hesitate to ask for help from a friend. Or ask for help from a professional who will guide you step by step to reset the audio settings and sound on your LG 49UH661V.

How do I reset my sound on my LG TV?

If you are experiencing an issue with your Audio or Video, you can easily reset you’re A/V to factory settings.

Press the Mute button on the remote control 3 times, then click AV Reset.

How do I fix the sound on my TV?

– Check the Speakers setting on the TV.
– Increase the volume of the TV.
– Make sure the MUTE option of the TV isn’t enabled.
– Make sure no headphones are connected to the TV.
– Perform a power reset on the TV.
– If using a set-top box with a volume control, increase the volume of the set-top box.

Why is my LG TV sound not working?

First, make sure the volume is turned up and the audio settings on your TV are correct.

If that doesn’t work, try resetting the HDMI connection and using a different HDMI cable or audio output port.

If all else fails, contact LG customer support for assistance.

How do I reset my LG TV settings?

– Step 1: open the menu. Use the remote to open the menu.
– Step 2: open ‘All settings’ Select the option All settings in the list of options and press the OK button.
– Step 3: navigate to General. Select the options General.
– Step 4: go to Reset to Initial Settings.

Go down until you see the Revert to factory settings option.

LG Ultra HD TV UH661V Product Video

11 ancillary questions

Why is there no sound from my TV?

Turning your TV off and back on again is one of the first things you should do if the volume isn’t working or is stuck. Verify the audio settings.

Make sure that the TV’s audio input settings are on.

Make sure the HDMI cable is connected.

How do I get to the Settings menu on my LG TV?

– From the Home screen, tap Apps > the Apps tab (if necessary) > Settings . OR. From the Home screen, tap the Menu key > Settings.
– Select a setting category and configure the desired settings.

How do I change the audio output on my LG TV?

on the remote control and select Settings > SOUND > Sound Out, then press Wheel or Enter.

2. Depending on the method of connection for external audio, this will be either: Optical Digital Audio Output (Optical cable) or HDMI/ARC (HDMI cable).

How do you factory reset a phone that is locked?

– To activate it, press and hold the power button and volume up button on your phone at the same time.
– Wait until a menu appears on the screen, then find the recovery mode in it.
– Find the option that offers to wipe all data from the phone and select it, then confirm this action.

Why is there no sound from my LG soundbar?

LG Soundbar Not Connecting: Connection Issues Unplug the power, wait 10 seconds, and replug in both the TV and Soundbar.

Turn both devices on and wait for a minute.

If they don’t connect, go to your TV menu and look for Sound. Find Pair devices or make sure the Sound is set Out to the correct device.

How do I turn my LG sound on?

On most LG TVs, you can access the audio settings by pressing the “Settings” button on your remote control and then navigating to the “Audio” or “Sound” section of the menu. From here, you can adjust the volume and make sure that the TV’s built-in speakers are enabled.

How do I get sound from my TV to external speakers?

– Using the HDMI cable, connect the HDMI IN (ARC or eARC) port on the TV and the HDMI OUT (ARC or eARC) port on the audio device.
– Using the optical digital audio cable, connect the Optical Digital OUT port on the TV and the Optical Digital IN port on the audio device.
– Turn on the TV.
– Set Speakers to Audio system.

Why is there no sound coming from my LG sound bar?

You must remove the soundbar from its power source and unplug all devices connected to it. From there, wait for one to two minutes before putting it back together and turning the device on. Last but not least, firmware updates could also cause this issue.

How do I manually reset my LG?

Press and hold the following keys at the same time: Volume Down Key + Power/Lock Key on the back of the phone.

Release the Power/Lock Key only when the LG logo is displayed, then immediately press and hold the Power/Lock Key again.

Release all keys when the Factory hard reset screen is displayed.

How do I get my LG TV to play sound through my speakers?

Open the Settings menu either by using the button on your remote, or if your remote doesn’t have a Settings button, press the Home/Smart button, then click the Settings icon. Navigate to the Audio/Sound menu. Choose Sound Out, then select TV Speakers.

Why would the sound suddenly stop working on my TV?

Check the audio settings on your TV and connected devices.

Turn off and unplug your TV and connected devices.

Inspect the TV cables and ports, then check the ones on your devices as well.

Are they connected correctly and firmly?May 11, 2021

You may also be interested in the following articles:

You still have issues? Our team of experts and passionate could help you, feel free to contact us.