How to reset the sound and audio settings on HISENSE TV LED H65A6500
Sometimes the sound or audio system of your HISENSE TV LED H65A6500 does not work properly.
There may be sound “beeps” from the television, no more sound at all, or the sound of your program is offset from the picture.
In any case, the experience is unpleasant for you! But do not lose patience, it is possible to put the sound on your HISENSE TV LED H65A6500. We will see in this article solutions for each problem stated above.
A “beep” sound from your HISENSE TV LED H65A6500
When you turn on your HISENSE TV LED H65A6500, and use it, a “beep” sound disturbs your evening activity? This happens when a capacitor burns and interferes with the proper operation of your HISENSE TV LED H65A6500. But do not worry, you can change it! Capacitors are electrical components essential to the start-up of an electronic object.
They are made of an insulation and two metal wires.
Be careful, if you do not feel comfortable with the following procedure, bring yourself closer to an expert who will help you for a reasonable price.
Be aware, this is a dangerous operation, and unless you are an expert, we do not advise you to do it yourself! To repair capacitors on HISENSE TV LED H65A6500, you must disassemble to the back of your HISENSE TV LED H65A6500 TV and disassemble the protective shell if the capacitors are not already visible.
When you see them, have a pair of pliers, and separate them from the TV. Next, place the capacitors, which you can buy for the price of a baguette in a store, in the right place and with the help of a welder, assemble them to your TV. Wait a few minutes for the capacitors to cool down.
No sound on your HISENSE TV LED H65A6500
The first simple step in this case is to check if your TV, model HISENSE TV LED H65A6500, and decoder are not “mute” or if the sound is not too low on each.
If this is not the problem, check the connections of your SCART or HDMi cable and those of your amps.
If all this does not work, and you do not have amps, try going to the “Menu” of your decoder, and go to “Settings”.
Then select “Picture & Sound”. Continue in “Sound Adjustment”, and deactivate Dolby Digital on the HDMI output by selecting “No”.
The sound must be returned to normal on your HISENSE TV LED H65A6500.
Find all the information about HISENSE TV LED H65A6500 in our articles.
Offset sound on HISENSE TV LED H65A6500
You wanted to follow your favorite program when you realized that the sound did not match the image at all. Whether it’s early or late, it’s very disturbing for your viewer experience! Do not worry, here’s how to resize the sound to the image on your TV HISENSE TV LED H65A6500.
Shifted sound from your HISENSE TV LED H65A6500 on a channel only
When you have the sound offset to one, see two channels only, it is likely that either these channels are set to a foreign language sound channel.
If you watch a lot of programs in Original Version on your HISENSE TV LED H65A6500, it may be your case.
To fix this, go to the channel with the problem.
Take the remote control of your decoder and press “Menu”, then “Language setting”.
In the “Audio” section displayed on the screen of your HISENSE TV LED H65A6500, select the channel’s original language.
Here it is! The sound is normally set back on the picture!
Sound delay on your HISENSE TV LED H65A6500
Some TVs like your HISENSE TV LED H65A6500 have a “Sound delay” option.
If this has been set on your HISENSE TV LED H65A6500, go to the “Menu” of your decoder, and go to “Settings”.
Then select “Picture & Sound”. Continue in “Sound Adjustment”, and deactivate Dolby Digital on the HDMI output by selecting “No”.
The sound must be returned to normal.
To conclude on reseting the sound and audio settings on HISENSE TV LED H65A6500
We have just seen how to reset the sound on TV HISENSE TV LED H65A6500.
However, if you encounter any difficulties, do not hesitate to ask for help from a friend. Or ask for help from a professional who will guide you step by step to reset the audio settings and sound on your HISENSE TV LED H65A6500.
How do I find audio settings on my TV?
– Use your remote to access the TV’s settings menu, then look for a section called Audio, Sound or something similar.
– At the top of the menu should be a selection of presets such as Movie, User or Standard.
How do I change the audio output on my Hisense TV?
– Settings > Sound.
– Settings > Sound > Audio Ouput > ARC.
– Settings > Sound > eARC > On.
– Settings > Sound > Dolby Atmos > On.
– Settings > Advanced Settings > Digital Audio Out > Dolby Digital Plus.
How do I get the volume to work on my Hisense TV?
Look behind the TV, and the volume controls are likely hidden away on the sides.
Also, some Hisense TV models offer volume adjustment via the Power button.
To change the volume settings, do the following: Push the Power button to the left or right side.
How to Factory Reset Your Hisense TV
12 ancillary questions
How do I adjust my TV sound to hear voices?
Adjust Your Settings To begin, press Menu on your remote control and select Sound.
Here, you will find the settings that may need to be adjusted.
This could require some trial and error.
First look for something called “Dynamic Range Compression” (some TVs have an option called “Night Mode,” which is similar).
Can hear background noise but not voices?
Hardware issues include frayed or exposed cables, short circuits, and bent or loose headphone jacks.
These issues are quite common over time, especially if there’s regular tension on the cable.
Any one of these problems can cause intermittent or incomplete audio on your headphones.
How do I check my TV settings?
Press and hold the Home button until the quick settings menu appears, and then select All Settings.
From here, select and adjust your desired options.
Picture: Adjust the viewing mode, picture size, and Expert Settings like Backlight and Brightness.
How do you get sound from a TV to a soundbar?
Connect one end of the HDMI cable (sold separately) to the HDMI IN port on your TV. Connect the other end to the TV OUT (ARC) port on your sound bar.
Then, connect an optical audio cable from the TV’s Optical digital audio out to OPTICAL IN on your sound bar (this is necessary to hear the TV audio).
How do I activate apps and services on my Samsung TV?
– 1 Press the Home or Menu button on your TV remote.
– 2 Navigate to Settings.
– 3 Select General.
– 4 Select System Manager.
– 5 Select Samsung Account.
– 6 Log in to or create a Samsung Account.
– 1 Press the Home or Smart Hub button on your TV remote.
– 2 Navigate to APPS.
How do I connect a soundbar to my Hisense TV?
Connect to HDMI (ARC) Socket If your TV is HDMI ARC compliant, you can hear the TV audio through your Soundbar by using a single HDMI cable.
1 Using a High Speed HDMI cable (not included), connect the HDMI OUT (ARC)-TO TV connector on your Soundbar to the HDMI ARC connector on the TV.
Where is the PCM setting on Hisense TV?
– Go into your Settings Menu, Select “DEVICE PREFERENCES”
– Select “SOUND”
– Go to “DIGITAL OPTICAL OUTPUT”
– Set it to “PCM”
Locate the square-shaped button on your television, press the button until your TV is turned on.
Then, wait for the screen to load until you see the menu button at the bottom of your TV screen. With the use of the min and max volume buttons on the side of your TV, you can navigate through the service mode.
Why is the background sound louder than the voices on my TV?
Many home TVs have relatively low fidelity speakers which accentuate upper mid-range and high frequencies, while the human voice tends to be in the mid-audio range.
The rest of the sound spectrum, which would ideally help keep music and voices distinct, is often deficient on home televisions.
How do I connect external Speakers to my Hisense TV?
– The HDMI ports are situated on the back of the TV.
– Insert the HDMI cable into the desired HDMI port.
– Insert the other end of the HDMI cable into the HDMI ARC port.
– Press Quick menu.
– Scroll to Settings and press OK.
– Scroll to Sound and press OK.
– Scroll to Speakers and press OK.
Why can’t I hear the voices on TV?
If your TV has an equalizer (EQ) that lets you adjust various frequencies, try lowering the bass and lower mid-range and boosting the upper midrange and higher frequencies, where voices are typically found, to compensate.
If you don’t like the results, change back to factory settings and start again.
What should my Samsung TV settings be?
The optimal picture settings for a Samsung TV are Contrast 45, Brightness 0, Sharpness 0, Color 50, Tint R50 and Backlight 20. Once you set the TV’s setting to these numbers, adjust them up and down based on the movie, game or show you’re watching, lighting conditions, viewing angle, glare, distance from the TV, etc.
You may also be interested in the following articles:
- How to record on HISENSE TV LED H65A6500
- How to set DTT channels on HISENSE TV LED H43A6550
- How to unlock your HISENSE TV LED H43A6550
You still have issues? Our team of experts and passionate could help you, feel free to contact us.