How to reset the sound and audio settings on HISENSE 60N5700
Sometimes the sound or audio system of your HISENSE 60N5700 does not work properly.
There may be sound “beeps” from the television, no more sound at all, or the sound of your program is offset from the picture.
In any case, the experience is unpleasant for you! But do not lose patience, it is possible to put the sound on your HISENSE 60N5700. We will see in this article solutions for each problem stated above.
A “beep” sound from your HISENSE 60N5700
When you turn on your HISENSE 60N5700, and use it, a “beep” sound disturbs your evening activity? This happens when a capacitor burns and interferes with the proper operation of your HISENSE 60N5700. But do not worry, you can change it! Capacitors are electrical components essential to the start-up of an electronic object.
They are made of an insulation and two metal wires.
Be careful, if you do not feel comfortable with the following procedure, bring yourself closer to an expert who will help you for a reasonable price.
Be aware, this is a dangerous operation, and unless you are an expert, we do not advise you to do it yourself! To repair capacitors on HISENSE 60N5700, you must disassemble to the back of your HISENSE 60N5700 TV and disassemble the protective shell if the capacitors are not already visible.
When you see them, have a pair of pliers, and separate them from the TV. Next, place the capacitors, which you can buy for the price of a baguette in a store, in the right place and with the help of a welder, assemble them to your TV. Wait a few minutes for the capacitors to cool down.
No sound on your HISENSE 60N5700
The first simple step in this case is to check if your TV, model HISENSE 60N5700, and decoder are not “mute” or if the sound is not too low on each.
If this is not the problem, check the connections of your SCART or HDMi cable and those of your amps.
If all this does not work, and you do not have amps, try going to the “Menu” of your decoder, and go to “Settings”.
Then select “Picture & Sound”. Continue in “Sound Adjustment”, and deactivate Dolby Digital on the HDMI output by selecting “No”.
The sound must be returned to normal on your HISENSE 60N5700.
Find all the information about HISENSE 60N5700 in our articles.
Offset sound on HISENSE 60N5700
You wanted to follow your favorite program when you realized that the sound did not match the image at all. Whether it’s early or late, it’s very disturbing for your viewer experience! Do not worry, here’s how to resize the sound to the image on your TV HISENSE 60N5700.
Shifted sound from your HISENSE 60N5700 on a channel only
When you have the sound offset to one, see two channels only, it is likely that either these channels are set to a foreign language sound channel.
If you watch a lot of programs in Original Version on your HISENSE 60N5700, it may be your case.
To fix this, go to the channel with the problem.
Take the remote control of your decoder and press “Menu”, then “Language setting”.
In the “Audio” section displayed on the screen of your HISENSE 60N5700, select the channel’s original language.
Here it is! The sound is normally set back on the picture!
Sound delay on your HISENSE 60N5700
Some TVs like your HISENSE 60N5700 have a “Sound delay” option.
If this has been set on your HISENSE 60N5700, go to the “Menu” of your decoder, and go to “Settings”.
Then select “Picture & Sound”. Continue in “Sound Adjustment”, and deactivate Dolby Digital on the HDMI output by selecting “No”.
The sound must be returned to normal.
To conclude on reseting the sound and audio settings on HISENSE 60N5700
We have just seen how to reset the sound on TV HISENSE 60N5700.
However, if you encounter any difficulties, do not hesitate to ask for help from a friend. Or ask for help from a professional who will guide you step by step to reset the audio settings and sound on your HISENSE 60N5700.
How do I get the volume to work on my Hisense TV?
Look behind the TV, and the volume controls are likely hidden away on the sides.
Also, some Hisense TV models offer volume adjustment via the Power button.
To change the volume settings, do the following: Push the Power button to the left or right side.
How do I change the audio output on my Hisense TV?
– Settings > Sound.
– Settings > Sound > Audio Ouput > ARC.
– Settings > Sound > eARC > On.
– Settings > Sound > Dolby Atmos > On.
– Settings > Advanced Settings > Digital Audio Out > Dolby Digital Plus.
Hisense Smart TV: How to Reset Audio / Sound (Audio Problems?)
8 ancillary questions
How do I fix my Hisense TV without sound?
How do I reset my Hisense Smart TV?
How do you change the audio output on a TV?
Go into the Sound or Speakers menu of the TV, and select External Speakers or Audio System. Some TVs require that the internal speakers be turned off before outputting the audio signal to another device.
Why doesn’t my TV have audio output?
Make sure the optical cable is firmly connected to both the TV and the home theater or stereo system.
Try changing the channel on the TV to another digital broadcast. Go into the Sound or Speakers menu of the TV and select External Speakers or Audio System.
Why is my TV volume suddenly not working?
Turning your TV off and back on again is one of the first things you should do if the volume isn’t working or is stuck. Verify the audio settings.
Make sure that the TV’s audio input settings are on.
Make sure the HDMI cable is connected.
At the back or bottom of your Hisense TV, there is a reset hole.
Look around your TV to find a small hole labeled “RESET”. Bend a paper clip to insert into the hole.
Push the clip inside the hole and press it for about 15 seconds.
Most Hisense TV models come with a reset button at the back that you can just simply press.
If your model does not have a reset button, there are a couple of alternatives you can try.
First, you can press and hold the power button for a minute and then plug and unplug your TV.
Why does my LG TV have no audio output?
The issue is with the configuration of the external sound device, or the wiring connecting the two.
Make sure the audio wire you’re using is correctly and securely connected to both the TV’s Audio-Out port and the sound device’s Audio-In port.
Try to use a different audio cable; your cable may have stopped working.
You may also be interested in the following articles:
- How to use HISENSE H43B7120
- How to reset a normal color on HISENSE TV LED H50A6550
- HISENSE TV LED H65A6500 TV no longer lights or stays on standby
You still have issues? Our team of experts and passionate could help you, feel free to contact us.