How to reset the sound and audio settings on GRUNDIG TV LED 49VLX7730WP
Sometimes the sound or audio system of your GRUNDIG TV LED 49VLX7730WP does not work properly.
There may be sound “beeps” from the television, no more sound at all, or the sound of your program is offset from the picture.
In any case, the experience is unpleasant for you! But do not lose patience, it is possible to put the sound on your GRUNDIG TV LED 49VLX7730WP. We will see in this article solutions for each problem stated above.
A “beep” sound from your GRUNDIG TV LED 49VLX7730WP
When you turn on your GRUNDIG TV LED 49VLX7730WP, and use it, a “beep” sound disturbs your evening activity? This happens when a capacitor burns and interferes with the proper operation of your GRUNDIG TV LED 49VLX7730WP. But do not worry, you can change it! Capacitors are electrical components essential to the start-up of an electronic object.
They are made of an insulation and two metal wires.
Be careful, if you do not feel comfortable with the following procedure, bring yourself closer to an expert who will help you for a reasonable price.
Be aware, this is a dangerous operation, and unless you are an expert, we do not advise you to do it yourself! To repair capacitors on GRUNDIG TV LED 49VLX7730WP, you must disassemble to the back of your GRUNDIG TV LED 49VLX7730WP TV and disassemble the protective shell if the capacitors are not already visible.
When you see them, have a pair of pliers, and separate them from the TV. Next, place the capacitors, which you can buy for the price of a baguette in a store, in the right place and with the help of a welder, assemble them to your TV. Wait a few minutes for the capacitors to cool down.
No sound on your GRUNDIG TV LED 49VLX7730WP
The first simple step in this case is to check if your TV, model GRUNDIG TV LED 49VLX7730WP, and decoder are not “mute” or if the sound is not too low on each.
If this is not the problem, check the connections of your SCART or HDMi cable and those of your amps.
If all this does not work, and you do not have amps, try going to the “Menu” of your decoder, and go to “Settings”.
Then select “Picture & Sound”. Continue in “Sound Adjustment”, and deactivate Dolby Digital on the HDMI output by selecting “No”.
The sound must be returned to normal on your GRUNDIG TV LED 49VLX7730WP.
Find all the information about GRUNDIG TV LED 49VLX7730WP in our articles.
Offset sound on GRUNDIG TV LED 49VLX7730WP
You wanted to follow your favorite program when you realized that the sound did not match the image at all. Whether it’s early or late, it’s very disturbing for your viewer experience! Do not worry, here’s how to resize the sound to the image on your TV GRUNDIG TV LED 49VLX7730WP.
Shifted sound from your GRUNDIG TV LED 49VLX7730WP on a channel only
When you have the sound offset to one, see two channels only, it is likely that either these channels are set to a foreign language sound channel.
If you watch a lot of programs in Original Version on your GRUNDIG TV LED 49VLX7730WP, it may be your case.
To fix this, go to the channel with the problem.
Take the remote control of your decoder and press “Menu”, then “Language setting”.
In the “Audio” section displayed on the screen of your GRUNDIG TV LED 49VLX7730WP, select the channel’s original language.
Here it is! The sound is normally set back on the picture!
Sound delay on your GRUNDIG TV LED 49VLX7730WP
Some TVs like your GRUNDIG TV LED 49VLX7730WP have a “Sound delay” option.
If this has been set on your GRUNDIG TV LED 49VLX7730WP, go to the “Menu” of your decoder, and go to “Settings”.
Then select “Picture & Sound”. Continue in “Sound Adjustment”, and deactivate Dolby Digital on the HDMI output by selecting “No”.
The sound must be returned to normal.
To conclude on reseting the sound and audio settings on GRUNDIG TV LED 49VLX7730WP
We have just seen how to reset the sound on TV GRUNDIG TV LED 49VLX7730WP.
However, if you encounter any difficulties, do not hesitate to ask for help from a friend. Or ask for help from a professional who will guide you step by step to reset the audio settings and sound on your GRUNDIG TV LED 49VLX7730WP.
Why has my TV suddenly lost sound?
Turning your TV off and back on again is one of the first things you should do if the volume isn’t working or is stuck. Verify the audio settings.
Make sure that the TV’s audio input settings are on.
Make sure the HDMI cable is connected.
How do I reset my TV sound?
1 Press the Home button on your remote control. 2 Using the directional pad on your remote, navigate to and select Settings.
3 Navigate to and select Sound > Expert Settings.
4 Navigate to and select Reset Sound.
How do I find audio settings on my TV?
– Use your remote to access the TV’s settings menu, then look for a section called Audio, Sound or something similar.
– At the top of the menu should be a selection of presets such as Movie, User or Standard.
How to adjust image and sound settings on Android TV? | GRUNDIG
9 ancillary questions
What causes TV not to show pictures?
The most common reason is that your TV is on the wrong input.
You can typically change the input by pushing a button on your TV remote labelled “input”, “source”, or “TV/Video.” Keep pushing the button to cycle through the inputs until you have your picture back.
Why is my TV audio out not working?
Make sure the optical cable is firmly connected to both the TV and the home theater or stereo system.
Try changing the channel on the TV to another digital broadcast. Go into the Sound or Speakers menu of the TV and select External Speakers or Audio System.
What causes a TV to have a black screen?
Black Screen Of Death This can be caused by a variety of factors, including hardware or software issues, power problems, or issues with the HDMI connections.
In many cases, the black screen of death can be fixed by restarting the TV or by resetting it to its factory settings.
Is it worth fixing backlight on TV?
It is cheaper to repair a backlight than buying a new TV but I wouldn’t recommend doing so unless you have experience in taking screens apart like TVs, PC monitors, and mobile devices.
How do I adjust my TV sound to hear voices?
Adjust Your Settings To begin, press Menu on your remote control and select Sound.
Here, you will find the settings that may need to be adjusted.
This could require some trial and error.
First look for something called “Dynamic Range Compression” (some TVs have an option called “Night Mode,” which is similar).
Why is there suddenly no sound on my Samsung TV?
On your TV, navigate to Settings, then select Support, and then select Self Diagnosis.
Select Sound Test and wait for the test to finish.
If the test reveals a problem, you can try resetting the sound. From Settings, select Sound, then select Expert Settings, and then select Reset Sound.
Why has my TV suddenly lost sound?
Check the audio settings on your TV and connected devices.
Turn off and unplug your TV and connected devices.
Inspect the TV cables and ports, then check the ones on your devices as well.
Are they connected correctly and firmly?May 11, 2021
How do you know if your TV backlight is broken?
How do you know if your TV backlight is broken? To see if your TV’s backlight is causing the problem, make sure your TV is on, and turn off the lights in the room. Shine a flashlight on the screen to see if there’s a picture.
If you can see a picture with the flashlight, then your TV’s backlight is burnt out.
Why is optical audio not working?
The optical cable isn’t securely connected.
The optical cable may be faulty.
Your TV isn’t updated with the latest software version.
The connected third-party sound bar, or home theater system may not be compatible with your TV.
You may also be interested in the following articles:
- How to set DTT channels on GRUNDIG TV 22VLE5520BG 200Hz PPR
- How to record on GRUNDIG TV 28VLE5500WG
- How to go online with a GRUNDIG TV LED 22VLE5520BG
You still have issues? Our team of experts and passionate could help you, feel free to contact us.