How to reset sound and audio settings on GRUNDIG TV LED 22VLE5520BG

How to reset the sound and audio settings on GRUNDIG TV LED 22VLE5520BG

Sometimes the sound or audio system of your GRUNDIG TV LED 22VLE5520BG does not work properly.

There may be sound “beeps” from the television, no more sound at all, or the sound of your program is offset from the picture.

In any case, the experience is unpleasant for you! But do not lose patience, it is possible to put the sound on your GRUNDIG TV LED 22VLE5520BG. We will see in this article solutions for each problem stated above.

A “beep” sound from your GRUNDIG TV LED 22VLE5520BG

When you turn on your GRUNDIG TV LED 22VLE5520BG, and use it, a “beep” sound disturbs your evening activity? This happens when a capacitor burns and interferes with the proper operation of your GRUNDIG TV LED 22VLE5520BG. But do not worry, you can change it! Capacitors are electrical components essential to the start-up of an electronic object.

They are made of an insulation and two metal wires.

Be careful, if you do not feel comfortable with the following procedure, bring yourself closer to an expert who will help you for a reasonable price.

Be aware, this is a dangerous operation, and unless you are an expert, we do not advise you to do it yourself! To repair capacitors on GRUNDIG TV LED 22VLE5520BG, you must disassemble to the back of your GRUNDIG TV LED 22VLE5520BG TV and disassemble the protective shell if the capacitors are not already visible.

When you see them, have a pair of pliers, and separate them from the TV. Next, place the capacitors, which you can buy for the price of a baguette in a store, in the right place and with the help of a welder, assemble them to your TV. Wait a few minutes for the capacitors to cool down.

No sound on your GRUNDIG TV LED 22VLE5520BG

The first simple step in this case is to check if your TV, model GRUNDIG TV LED 22VLE5520BG, and decoder are not “mute” or if the sound is not too low on each.

If this is not the problem, check the connections of your SCART or HDMi cable and those of your amps.

If all this does not work, and you do not have amps, try going to the “Menu” of your decoder, and go to “Settings”.

Then select “Picture & Sound”. Continue in “Sound Adjustment”, and deactivate Dolby Digital on the HDMI output by selecting “No”.

The sound must be returned to normal on your GRUNDIG TV LED 22VLE5520BG.

Find all the information about GRUNDIG TV LED 22VLE5520BG in our articles.

Offset sound on GRUNDIG TV LED 22VLE5520BG

You wanted to follow your favorite program when you realized that the sound did not match the image at all. Whether it’s early or late, it’s very disturbing for your viewer experience! Do not worry, here’s how to resize the sound to the image on your TV GRUNDIG TV LED 22VLE5520BG.

Shifted sound from your GRUNDIG TV LED 22VLE5520BG on a channel only

When you have the sound offset to one, see two channels only, it is likely that either these channels are set to a foreign language sound channel.

If you watch a lot of programs in Original Version on your GRUNDIG TV LED 22VLE5520BG, it may be your case.

To fix this, go to the channel with the problem.

Take the remote control of your decoder and press “Menu”, then “Language setting”.

In the “Audio” section displayed on the screen of your GRUNDIG TV LED 22VLE5520BG, select the channel’s original language.

Here it is! The sound is normally set back on the picture!

Sound delay on your GRUNDIG TV LED 22VLE5520BG

Some TVs like your GRUNDIG TV LED 22VLE5520BG have a “Sound delay” option.

If this has been set on your GRUNDIG TV LED 22VLE5520BG, go to the “Menu” of your decoder, and go to “Settings”.

Then select “Picture & Sound”. Continue in “Sound Adjustment”, and deactivate Dolby Digital on the HDMI output by selecting “No”.

The sound must be returned to normal.

To conclude on reseting the sound and audio settings on GRUNDIG TV LED 22VLE5520BG

We have just seen how to reset the sound on TV GRUNDIG TV LED 22VLE5520BG.

However, if you encounter any difficulties, do not hesitate to ask for help from a friend. Or ask for help from a professional who will guide you step by step to reset the audio settings and sound on your GRUNDIG TV LED 22VLE5520BG.

How do I reset the sound on my smart TV?

– 1 From Smart Hub panel, Select Settings.
– 2 Select Sound.
– 3 Select Expert Settings.
– 4 Select Reset Sound.
– 5 Select Reset to reset all sound settings.

How do I reset my Grundig TV?

Enter the code 9 8 1, the LED will blink 4 times.

The remote is now reset to its factory defaults.

Why has my TV suddenly lost sound?

Turning your TV off and back on again is one of the first things you should do if the volume isn’t working or is stuck. Verify the audio settings.

Make sure that the TV’s audio input settings are on.

Make sure the HDMI cable is connected.

How do I reset my TV sound?

1 Press the Home button on your remote control. 2 Using the directional pad on your remote, navigate to and select Settings.

3 Navigate to and select Sound > Expert Settings.

4 Navigate to and select Reset Sound.

How to adjust image and sound settings on Android TV? | GRUNDIG

7 ancillary questions

Why is my Samsung TV screen black and no sound?

To fix this problem, try disconnecting and reconnecting the HDMI cable.

If possible, try a different HDMI cable to see if that fixes the issue.

Another thing for you to check in case of black screen on Samsung TV is your power cable.

Make sure it’s securely connected to both your TV and the power socket.

How do you fix a black screen on a TV that has sound?

– Unplug your TV for 60 seconds.

Don’t just turn it off.
– Hold the power button down for 30 seconds after it is unplugged.
– Count slow on those 60 seconds or use a watch.
– Plug your TV back in and check for a picture.

If it’s working, you are done.
– If not, go to the next step.

Why does my Samsung TV have no picture or sound?

A connection issue; the most common problem. Where there is a bad connection, faulty cables or improper installation.

An issue with the device connected to the TV.

There may be a video output setting on the device that you must set properly before it will output to the TV.

Why do I have picture but no sound on my TV?

Check the volume on your TV.

It sounds silly, but sometimes just making sure your TV isn’t muted or set to a very low volume will solve the problem.

Most televisions display the sound level on the screen as you adjust the volume; look for that in the corner of the screen as you press your remote’s volume button.

What happens when TV screen goes black but sound still works?

Backlight issues: LCD screens use a backlight to light up images displayed on the screen.

If the backlight experiences any technical issues, it won’t light the display, and the screen will be black, but the user will still hear sound in the background.

To fix this problem, TV owners need to repair their backlights.

How do I turn the sound back on my TV?

– Check the Speakers setting on the TV.
– Increase the volume of the TV.
– Make sure the MUTE option of the TV isn’t enabled.
– Make sure no headphones are connected to the TV.
– Perform a power reset on the TV.
– If using a set-top box with a volume control, increase the volume of the set-top box.

What would cause a TV to lose sound?

Unsecured television cables could also lead to the absence of any sound from your TV. Someone might have accidentally pulled off a plug cable from the external speaker device, restricting all sound output from your TV.

You can get a new cable if any of the TV set cables are damaged.

You may also be interested in the following articles:

You still have issues? Our team of experts and passionate could help you, feel free to contact us.