How to reset a normal color on TELEFUNKEN FP32CB02C17C – Combo

How to reset a normal color on your TELEFUNKEN FP32CB02C17C – Combo

You wanted to watch TV when, suddenly, you noticed your TELEFUNKEN FP32CB02C17C – Combo displayed catastrophic colors! Fluorescent, black and white, colors too saturated, or a burr in the colors at startup… These color problems are really unpleasant for your viewer experience.

This is why we have chosen to introduce you in this article how to reset a normal color on your TELEFUNKEN FP32CB02C17C – Combo. We will see the problem of connecting the SCART, the possible TV settings, and the quality of the capacitors of your TELEFUNKEN FP32CB02C17C – Combo.

SCART on your TELEFUNKEN FP32CB02C17C – Combo

The SCART cable is the cable that allows an audio and video connection between your decoder and your television.

It is the cousin of the hdmi cable.

When it is loose or damaged, the quality of the audio or video on your television may drop dramatically.

In particular, your TELEFUNKEN FP32CB02C17C – Combo can have fluorescent colors instead of normal colors.

In this case, first check the connection of your SCART. Unplug it, clean its inputs and outputs, and reconnect it.

If this does not work, you must replace your cable.

You can find them easily in stores.

When you connect the new cable, be careful to turn off the TV and the decoder to avoid handling problems.

Your TELEFUNKEN FP32CB02C17C – Combo settings

It sometimes happens that after a power failure, your TV settings will change without your knowledge.

It also happens that a child takes your remote control and plays with it before turning off the television.

In both cases, your television may suddenly appear in black and white, or on the contrary, with saturated colors.

Find all the information about How to reset a normal color on TELEFUNKEN FP32CB02C17C – Combo in our articles.

Do not panic ! Here is how to reset a normal color on your TELEFUNKEN FP32CB02C17C – Combo with standard TV settings.

Take the remote control of your TELEFUNKEN FP32CB02C17C – Combo, and press “Menu” then select “Setup”, which can also be called “Main Menu”, “System Menu”, “Tool Menu”, “Setup Menu” or “System Setup”.

There, go to “Image”.

You are in the menu that adjusts the image quality of your TELEFUNKEN FP32CB02C17C – Combo. Go to the saturation gauge.

You may have to go to a sub-menu called “Colors”.

If your image is in black and white, increase the saturation using the left and right directionnal buttons displayed on your TELEFUNKEN FP32CB02C17C – Combo.

If your image is too saturated in color, lower the saturation using the “left” and “right” directional buttons.

Then, if your television is in black and white, go to the “RGB” gauge of your TELEFUNKEN FP32CB02C17C – Combo, which can be divided into several gauges like “R1”, “R2”, “G1”, etc… Increase the gauges until the color is obtained.

It is not necessary to adjust these gauges if your television had the colors saturated. Finally, choose the display mode of the image you prefer for your TELEFUNKEN FP32CB02C17C – Combo.

You will have the choice between “Normal”, “Cinema”, “Dynamic, and others.” This can help you find the display mode best suited to your tastes.

Capacitors on TELEFUNKEN FP32CB02C17C – Combo

Finally, the capacitors may be at fault when the colors of your TELEFUNKEN FP32CB02C17C – Combo are not displayed correctly.

Notably at start-up, an image is displayed with colors that “drool”, then disappears after a little time of use.

If your capacitors work badly when cold, at start-up then, you have to change them. Capacitors are electrical components essential to the start-up of an electronic object.

They are made of an insulation and two metal wires.

Be careful, if you do not feel comfortable with the following procedure, bring yourself closer to an expert who will help you for a reasonable price.

Indeed, this procedure is highly risky as you may get electrocuted. Please unplug the power from your TELEFUNKEN FP32CB02C17C – Combo, and ask a professional to do it if you are not an expert about electricity.

To repair the capacitors, you must go to the back of your TELEFUNKEN FP32CB02C17C – Combo television and remove the protective cover if the capacitors are not already visible.

When you see them, have a pair of pliers, and separate them from the TV. Next, place the capacitors, which you can buy for the price of bread in a store, in the right place and with the help of a welder, assemble them to your TELEFUNKEN FP32CB02C17C – Combo. Wait a few minutes for the capacitors to cool down.

And now, the colors work again!

To conclude on resetting a normal color on your TELEFUNKEN FP32CB02C17C – Combo

We’ve just seen how to put a normal color on your TELEFUNKEN FP32CB02C17C – Combo.

However, if you encounter any difficulty, do not hesitate to ask for help from a friend. Or ask for help from a professional who will guide you step by step to do so. We hope it helped fixing your TELEFUNKEN FP32CB02C17C – Combo!

How do I reset my Telefunken TV?

Enter the code 9 8 1, the LED will blink 4 times.

The remote is now reset to its factory defaults.

Fix for Samsung TV color lcd display problem

7 ancillary questions

How can I turn my TV on without a remote?

Without Remote Check if your TV has a visible touch power button.

It is usually at the middle point of the lower panel of your TV. Check the the left and right sides and the top of your TV, some TVs have power buttons there.

Is a Telefunken TV a smart TV?

With their own Smart Gate, our SmartTVs offer you a huge choice of extra apps to make surfing, shopping, skyping and gaming as easy as channel-hopping.

A wide range of our TVs can be operated via your smartphone, allowing for comfortable, hands-on control.

Can I mirror my phone to my TV without Wi-Fi?

Yes.

You do not need Wi-Fi or an internet connection to mirror your phone screen to a TV.

Most screen mirroring and casting devices like Miracast, Chromecast, and AirPlay create a direct link that helps mirror your phone to your Smart TV wirelessly.

How can I connect my phone to my TV without Wi-Fi and remote?

You can view the screen of your Android device on a TV by mirroring it without Wi-Fi.

You will need to use a DeX cable or a USB-C to HDMI cable for it to work.

To do this, follow the steps below: To connect your phone to the TV, plug one end into the HDMI port and the other end go into your phone or smart device.

How can I use my phone as a remote for my LED TV?

– On your Android phone, open the Google TV app .
– Near the bottom right, tap Remote .
– At the top, tap Scanning for devices.
– Choose your device.
– To complete pairing, follow the instructions on your phone and TV.
– After pairing, you can use your phone or your remote.

How do I manually reset my TV?

How do I connect my TV without a remote?

Grab a Keyboard or Mouse That’s why the first thing you can try is to grab a USB keyboard or mouse and plug it directly into one of the USB ports on the back of your TV.

If your TV accepts it, then it should allow you to control the TV, allowing you to navigate to the TV’s settings and connect it to a Wi-Fi network.

You may also be interested in the following articles:

You still have issues? Our team of experts and passionate could help you, feel free to contact us.