How to reset a normal color on your TCL U65C7006
You wanted to watch TV when, suddenly, you noticed your TCL U65C7006 displayed catastrophic colors! Fluorescent, black and white, colors too saturated, or a burr in the colors at startup… These color problems are really unpleasant for your viewer experience.
This is why we have chosen to introduce you in this article how to reset a normal color on your TCL U65C7006. We will see the problem of connecting the SCART, the possible TV settings, and the quality of the capacitors of your TCL U65C7006.
SCART on your TCL U65C7006
The SCART cable is the cable that allows an audio and video connection between your decoder and your television.
It is the cousin of the hdmi cable.
When it is loose or damaged, the quality of the audio or video on your television may drop dramatically.
In particular, your TCL U65C7006 can have fluorescent colors instead of normal colors.
In this case, first check the connection of your SCART. Unplug it, clean its inputs and outputs, and reconnect it.
If this does not work, you must replace your cable.
You can find them easily in stores.
When you connect the new cable, be careful to turn off the TV and the decoder to avoid handling problems.
Your TCL U65C7006 settings
It sometimes happens that after a power failure, your TV settings will change without your knowledge.
It also happens that a child takes your remote control and plays with it before turning off the television.
In both cases, your television may suddenly appear in black and white, or on the contrary, with saturated colors.
Find all the information about How to reset a normal color on TCL U65C7006 in our articles.
Do not panic ! Here is how to reset a normal color on your TCL U65C7006 with standard TV settings.
Take the remote control of your TCL U65C7006, and press “Menu” then select “Setup”, which can also be called “Main Menu”, “System Menu”, “Tool Menu”, “Setup Menu” or “System Setup”.
There, go to “Image”.
You are in the menu that adjusts the image quality of your TCL U65C7006. Go to the saturation gauge.
You may have to go to a sub-menu called “Colors”.
If your image is in black and white, increase the saturation using the left and right directionnal buttons displayed on your TCL U65C7006.
If your image is too saturated in color, lower the saturation using the “left” and “right” directional buttons.
Then, if your television is in black and white, go to the “RGB” gauge of your TCL U65C7006, which can be divided into several gauges like “R1”, “R2”, “G1”, etc… Increase the gauges until the color is obtained.
It is not necessary to adjust these gauges if your television had the colors saturated. Finally, choose the display mode of the image you prefer for your TCL U65C7006.
You will have the choice between “Normal”, “Cinema”, “Dynamic, and others.” This can help you find the display mode best suited to your tastes.
Capacitors on TCL U65C7006
Finally, the capacitors may be at fault when the colors of your TCL U65C7006 are not displayed correctly.
Notably at start-up, an image is displayed with colors that “drool”, then disappears after a little time of use.
If your capacitors work badly when cold, at start-up then, you have to change them. Capacitors are electrical components essential to the start-up of an electronic object.
They are made of an insulation and two metal wires.
Be careful, if you do not feel comfortable with the following procedure, bring yourself closer to an expert who will help you for a reasonable price.
Indeed, this procedure is highly risky as you may get electrocuted. Please unplug the power from your TCL U65C7006, and ask a professional to do it if you are not an expert about electricity.
To repair the capacitors, you must go to the back of your TCL U65C7006 television and remove the protective cover if the capacitors are not already visible.
When you see them, have a pair of pliers, and separate them from the TV. Next, place the capacitors, which you can buy for the price of bread in a store, in the right place and with the help of a welder, assemble them to your TCL U65C7006. Wait a few minutes for the capacitors to cool down.
And now, the colors work again!
To conclude on resetting a normal color on your TCL U65C7006
We’ve just seen how to put a normal color on your TCL U65C7006.
However, if you encounter any difficulty, do not hesitate to ask for help from a friend. Or ask for help from a professional who will guide you step by step to do so. We hope it helped fixing your TCL U65C7006!
How do I reset my TCL Smart TV without the remote?
Using a straightened paper clip or ball-point pen, press and hold the recessed RESET button on the TV connector panel. Continue to hold the RESET button for approximately 12 seconds.
When the reset cycle completes, the status indicator comes on dim.
Release the RESET button.
How do I manually reset my TCL TV?
From the TCL Android TV remote control, press the Settings button. Scroll to More Settings > Device Preference > Reset. Select Factory data Reset on the Factory data Reset warning screen. Select Erase Everything.
Why is the color on my Roku TV messed up?
Try adjusting the picture quality settings Press the MENU button repeatedly to select the adjust menu.
Then press CHANNEL to highlight the picture item you want to adjust, using VOLUME + or – to adjust each item. Press DISPLAY or CLEAR to remove the menu.
TCL Roku Smart TV : How to Factory Reset or Reset Only TV Audio/Picture Settings
5 ancillary questions
How do I reset my TV to factory settings without a remote?
– Unplug the TV power cord from the electrical socket.
– Press and hold the Power button and Volume Down (-) buttons on the TV (not the remote), and while holding the buttons, plug the power cord back in.
– Press on your remote to open the main screen.
– Scroll down and select Settings.
– Press the right arrow button, scroll and select System.
– Press the right arrow button, scroll and select Advanced system settings.
– Press the right arrow button, scroll and select Factory reset.
What causes the picture to break up on my TV?
Picture break-up (pixilation) is generally due to low signal level or signal interference.
Common causes are faulty antenna cabling and connections, bad atmospheric conditions, or electrical appliances operating in the area.
How do you force reset a TCL Smart TV?
– Using a straightened paper clip or ball-point pen, press and hold the recessed RESET button on the TV connector panel.
– Continue to hold the RESET button for approximately 12 seconds.
– Release the RESET button.
Why is my TV picture breaking up?
Common causes are faulty antenna cabling and connections, bad atmospheric conditions, or electrical appliances operating in the area.
The most common solution is to retune the TV, but if that doesn’t help you will need to call an antenna technician.
You may also be interested in the following articles:
- TCL U55X9006 série X2 Xess TV no longer lights or stays on standby
- How to connect headphones to TCL TV LED 50DP660
- How to connect your TCL TV U60P6046
You still have issues? Our team of experts and passionate could help you, feel free to contact us.