How to reset a normal color on TCL TV LED 50DP660

How to reset a normal color on your TCL TV LED 50DP660

You wanted to watch TV when, suddenly, you noticed your TCL TV LED 50DP660 displayed catastrophic colors! Fluorescent, black and white, colors too saturated, or a burr in the colors at startup… These color problems are really unpleasant for your viewer experience.

This is why we have chosen to introduce you in this article how to reset a normal color on your TCL TV LED 50DP660. We will see the problem of connecting the SCART, the possible TV settings, and the quality of the capacitors of your TCL TV LED 50DP660.

SCART on your TCL TV LED 50DP660

The SCART cable is the cable that allows an audio and video connection between your decoder and your television.

It is the cousin of the hdmi cable.

When it is loose or damaged, the quality of the audio or video on your television may drop dramatically.

In particular, your TCL TV LED 50DP660 can have fluorescent colors instead of normal colors.

In this case, first check the connection of your SCART. Unplug it, clean its inputs and outputs, and reconnect it.

If this does not work, you must replace your cable.

You can find them easily in stores.

When you connect the new cable, be careful to turn off the TV and the decoder to avoid handling problems.

Your TCL TV LED 50DP660 settings

It sometimes happens that after a power failure, your TV settings will change without your knowledge.

It also happens that a child takes your remote control and plays with it before turning off the television.

In both cases, your television may suddenly appear in black and white, or on the contrary, with saturated colors.

Find all the information about How to reset a normal color on TCL TV LED 50DP660 in our articles.

Do not panic ! Here is how to reset a normal color on your TCL TV LED 50DP660 with standard TV settings.

Take the remote control of your TCL TV LED 50DP660, and press “Menu” then select “Setup”, which can also be called “Main Menu”, “System Menu”, “Tool Menu”, “Setup Menu” or “System Setup”.

There, go to “Image”.

You are in the menu that adjusts the image quality of your TCL TV LED 50DP660. Go to the saturation gauge.

You may have to go to a sub-menu called “Colors”.

If your image is in black and white, increase the saturation using the left and right directionnal buttons displayed on your TCL TV LED 50DP660.

If your image is too saturated in color, lower the saturation using the “left” and “right” directional buttons.

Then, if your television is in black and white, go to the “RGB” gauge of your TCL TV LED 50DP660, which can be divided into several gauges like “R1”, “R2”, “G1”, etc… Increase the gauges until the color is obtained.

It is not necessary to adjust these gauges if your television had the colors saturated. Finally, choose the display mode of the image you prefer for your TCL TV LED 50DP660.

You will have the choice between “Normal”, “Cinema”, “Dynamic, and others.” This can help you find the display mode best suited to your tastes.

Capacitors on TCL TV LED 50DP660

Finally, the capacitors may be at fault when the colors of your TCL TV LED 50DP660 are not displayed correctly.

Notably at start-up, an image is displayed with colors that “drool”, then disappears after a little time of use.

If your capacitors work badly when cold, at start-up then, you have to change them. Capacitors are electrical components essential to the start-up of an electronic object.

They are made of an insulation and two metal wires.

Be careful, if you do not feel comfortable with the following procedure, bring yourself closer to an expert who will help you for a reasonable price.

Indeed, this procedure is highly risky as you may get electrocuted. Please unplug the power from your TCL TV LED 50DP660, and ask a professional to do it if you are not an expert about electricity.

To repair the capacitors, you must go to the back of your TCL TV LED 50DP660 television and remove the protective cover if the capacitors are not already visible.

When you see them, have a pair of pliers, and separate them from the TV. Next, place the capacitors, which you can buy for the price of bread in a store, in the right place and with the help of a welder, assemble them to your TCL TV LED 50DP660. Wait a few minutes for the capacitors to cool down.

And now, the colors work again!

To conclude on resetting a normal color on your TCL TV LED 50DP660

We’ve just seen how to put a normal color on your TCL TV LED 50DP660.

However, if you encounter any difficulty, do not hesitate to ask for help from a friend. Or ask for help from a professional who will guide you step by step to do so. We hope it helped fixing your TCL TV LED 50DP660!

Where is reset button on TCL?

From the TCL Android TV remote control, press the Settings button. Scroll to More Settings > Device Preference > Reset.

What are the picture settings for TCL TV?

General Settings The ‘Movie’ picture mode is the most accurate one out of the box and allows for the most customization. For our calibration, from the Advanced Picture Settings menu, we set Contrast to ‘100’, Brightness to ’50’, and Sharpness to ‘0’. We also set Color to ’45’ and Tint to ‘0’.

FIX TCL SMART TV STUCK ON LOGO || TCL TV STUCK ON STARTUP SCREEN

8 ancillary questions

How do I reset my TCL Smart TV without the remote?

Using a straightened paper clip or ball-point pen, press and hold the recessed RESET button on the TV connector panel. Continue to hold the RESET button for approximately 12 seconds.

When the reset cycle completes, the status indicator comes on dim.

Release the RESET button.

How do I fix the color on my TCL TV?

1. Use the settings menu to adjust overall TV settings.

Press (home button) to go to home screen, and then navigate to settings > TV picture settings.

How do I force a factory reset on my TV?

– Turn on the TV.
– Press the HOME button on the remote control.
– Select Settings.
– The next steps will depend on your TV menu options: …
– Select Factory data reset or Reset.
– Select Erase Everything.
– Select Yes.

How do I fix the picture quality on my TCL TV?

To adjust the settings on the options menu, press (up button) or (down button) to highlight a setting, and then press (left button) or (right button) to change the setting.

You’ll notice the changes you make right away in picture appearance or audio quality.

What to do when your TCL TV turns on but the screen is black?

The best way to fix the black screen is to restart your TV.

If it does not work, check for loose connections.

If the HDMI cable has worn out, get a new one.

A software update can also help solve the black screen on your TCL TV.2 days ago

How do I fix my TV if my screen is black but still works?

Replace the HDMI cable as it may have a short or another defect which causes the black screen issue.

Unplug the TV for 5 minutes to attempt a reset. Unplugging the TV will reset the television and clear any temporary issues.

Factory reset of the TV to resolve the issue.

Why does my TV picture look like a negative?

@alberius Go to Settings > Picture>Accessibility >Colour Inversion and switch it off.

It will resolve the problem.

How do I fix a distorted picture on my TV?

Look through your TV’s menu system for a separate option called Overscan.

It will likely be near the Picture Size option in the menu, but it could appear anywhere (including the Advanced Settings). Set Overscan to Off or Disable and you’ll finally see the full picture.

You may also be interested in the following articles:

You still have issues? Our team of experts and passionate could help you, feel free to contact us.