How to reset a normal color on SONY KD65XD7505BAEP

How to reset a normal color on your SONY KD65XD7505BAEP

You wanted to watch TV when, suddenly, you noticed your SONY KD65XD7505BAEP displayed catastrophic colors! Fluorescent, black and white, colors too saturated, or a burr in the colors at startup… These color problems are really unpleasant for your viewer experience.

This is why we have chosen to introduce you in this article how to reset a normal color on your SONY KD65XD7505BAEP. We will see the problem of connecting the SCART, the possible TV settings, and the quality of the capacitors of your SONY KD65XD7505BAEP.

SCART on your SONY KD65XD7505BAEP

The SCART cable is the cable that allows an audio and video connection between your decoder and your television.

It is the cousin of the hdmi cable.

When it is loose or damaged, the quality of the audio or video on your television may drop dramatically.

In particular, your SONY KD65XD7505BAEP can have fluorescent colors instead of normal colors.

In this case, first check the connection of your SCART. Unplug it, clean its inputs and outputs, and reconnect it.

If this does not work, you must replace your cable.

You can find them easily in stores.

When you connect the new cable, be careful to turn off the TV and the decoder to avoid handling problems.

Your SONY KD65XD7505BAEP settings

It sometimes happens that after a power failure, your TV settings will change without your knowledge.

It also happens that a child takes your remote control and plays with it before turning off the television.

In both cases, your television may suddenly appear in black and white, or on the contrary, with saturated colors.

Find all the information about How to reset a normal color on SONY KD65XD7505BAEP in our articles.

Do not panic ! Here is how to reset a normal color on your SONY KD65XD7505BAEP with standard TV settings.

Take the remote control of your SONY KD65XD7505BAEP, and press “Menu” then select “Setup”, which can also be called “Main Menu”, “System Menu”, “Tool Menu”, “Setup Menu” or “System Setup”.

There, go to “Image”.

You are in the menu that adjusts the image quality of your SONY KD65XD7505BAEP. Go to the saturation gauge.

You may have to go to a sub-menu called “Colors”.

If your image is in black and white, increase the saturation using the left and right directionnal buttons displayed on your SONY KD65XD7505BAEP.

If your image is too saturated in color, lower the saturation using the “left” and “right” directional buttons.

Then, if your television is in black and white, go to the “RGB” gauge of your SONY KD65XD7505BAEP, which can be divided into several gauges like “R1”, “R2”, “G1”, etc… Increase the gauges until the color is obtained.

It is not necessary to adjust these gauges if your television had the colors saturated. Finally, choose the display mode of the image you prefer for your SONY KD65XD7505BAEP.

You will have the choice between “Normal”, “Cinema”, “Dynamic, and others.” This can help you find the display mode best suited to your tastes.

Capacitors on SONY KD65XD7505BAEP

Finally, the capacitors may be at fault when the colors of your SONY KD65XD7505BAEP are not displayed correctly.

Notably at start-up, an image is displayed with colors that “drool”, then disappears after a little time of use.

If your capacitors work badly when cold, at start-up then, you have to change them. Capacitors are electrical components essential to the start-up of an electronic object.

They are made of an insulation and two metal wires.

Be careful, if you do not feel comfortable with the following procedure, bring yourself closer to an expert who will help you for a reasonable price.

Indeed, this procedure is highly risky as you may get electrocuted. Please unplug the power from your SONY KD65XD7505BAEP, and ask a professional to do it if you are not an expert about electricity.

To repair the capacitors, you must go to the back of your SONY KD65XD7505BAEP television and remove the protective cover if the capacitors are not already visible.

When you see them, have a pair of pliers, and separate them from the TV. Next, place the capacitors, which you can buy for the price of bread in a store, in the right place and with the help of a welder, assemble them to your SONY KD65XD7505BAEP. Wait a few minutes for the capacitors to cool down.

And now, the colors work again!

To conclude on resetting a normal color on your SONY KD65XD7505BAEP

We’ve just seen how to put a normal color on your SONY KD65XD7505BAEP.

However, if you encounter any difficulty, do not hesitate to ask for help from a friend. Or ask for help from a professional who will guide you step by step to do so. We hope it helped fixing your SONY KD65XD7505BAEP!

How do I get normal TV on my Sony TV?

– Press the [HOME] button on the remote control.
– Select Settings.
– The next steps will depend on your TV menu options: Select Watching TV → Channel setup → Auto tuning → Analogue.
– When asked “Do you want to start Auto Tuning?”, select Yes.
– The TV will now start tuning.

A confirmation message will appear once completed.

How do I reset the Color on my Sony TV?

On the supplied remote control, press the HOME button. Select Picture & Display using the Up/Down buttons, then press the Enter button. Select Picture Adjustments using the Up/Down buttons, then press the Enter button. Select the item to be adjusted, then press the Enter button.

How do I reset my display on my Sony TV?

Why is my Sony TV screen darker than normal?

If Picture mode is set to Cinema or Custom, the screen may become dark.

If the screen is still dark after you change the picture quality mode, change the setting Backlight, Picture, Brightness and adjust the brightness to your taste.

THIS EASY 5 MINUTE TV REPAIR WILL FIX MOST VIDEO PICTURE PROBLEMS!!!

10 ancillary questions

How do I force a factory reset on my TV?

– Turn on the TV.
– Press the HOME button on the remote control.
– Select Settings.
– The next steps will depend on your TV menu options: …
– Select Factory data reset or Reset.
– Select Erase Everything.
– Select Yes.

Does my Sony TV have a reset button?

Part 1: Manual Factory Data Reset with TV buttons Press and hold the Power button and Volume Down (-) buttons on the TV (not the remote), and while holding the buttons, plug the power cord back in. Continue to hold the buttons down until a green LED light appears near the Sony logo on the TV front.

How can I force a factory reset?

– Click the Start Menu and select the gear icon in the lower-left to open up the Settings window.

You can also select the Settings app from the app list. Under Settings, click Update & Security to continue.
– Click the Recovery tab and select Get started under Reset this PC.

Should you reset your TV?

TVs are doing much more than they used to, so they too need a break every now and then as well.

According to Shull, you should be restarting your smart TV at least once a month. Doing so helps clean out the clutter, and prevent freezing mid-stream, sign-in troubles, and unresponsive services.

How do I manually reset my Sony TV?

Unplug the TV power cord from the electrical socket. Simultaneously, press and hold down the Power and Volume Down (-) buttons on the TV (not on the remote), and while holding the buttons, plug the power cord back in. Continue to hold the buttons down until a green LED light appears near the Sony logo on the TV front.

What will happen if I reset my TV?

Performing a factory reset will delete all of the TV’s data and settings (such as Wi-Fi and wired network setting information, Google account and other login information, Google Play and other installed apps).

Is there a way to hard reset a TV?

Power Reset Unplug the AC power cord (mains lead).

If the problem persists after step 1, unplug the TV power cord (mains lead) from the electrical outlet.

Then press the power button on the TV and wait for 2 minutes, and plug the power cord (mains lead) back into the electrical outlet.

How do I fix my Sony display problem?

– Perform a power reset or restart your TV: …
– Run the Self Diagnostics option on the TV (not available on all models).
– Check if the menu screen still appears blurry, hazy, or dull.
– If the issue continues, make sure to install the latest TV software.
– Clean your TV screen.

Is it good to reset TV?

Doing so helps clean out the clutter, and prevent freezing mid-stream, sign-in troubles, and unresponsive services.

Restarting can also cancel out multiple tasks from interfering with each other and allow your TV to start fresh, according to Shull.

How do I adjust the color on my Sony Smart TV?

– Press the (Quick Settings) button, then select Settings — Display & Sound — Picture— the desired option.
– Press the ACTION MENU button, then select Picture — the desired option.

You may also be interested in the following articles:

You still have issues? Our team of experts and passionate could help you, feel free to contact us.