How to reset a normal color on PHILIPS TV 65PUS6262

How to reset a normal color on your PHILIPS TV 65PUS6262

You wanted to watch TV when, suddenly, you noticed your PHILIPS TV 65PUS6262 displayed catastrophic colors! Fluorescent, black and white, colors too saturated, or a burr in the colors at startup… These color problems are really unpleasant for your viewer experience.

This is why we have chosen to introduce you in this article how to reset a normal color on your PHILIPS TV 65PUS6262. We will see the problem of connecting the SCART, the possible TV settings, and the quality of the capacitors of your PHILIPS TV 65PUS6262.

SCART on your PHILIPS TV 65PUS6262

The SCART cable is the cable that allows an audio and video connection between your decoder and your television.

It is the cousin of the hdmi cable.

When it is loose or damaged, the quality of the audio or video on your television may drop dramatically.

In particular, your PHILIPS TV 65PUS6262 can have fluorescent colors instead of normal colors.

In this case, first check the connection of your SCART. Unplug it, clean its inputs and outputs, and reconnect it.

If this does not work, you must replace your cable.

You can find them easily in stores.

When you connect the new cable, be careful to turn off the TV and the decoder to avoid handling problems.

Your PHILIPS TV 65PUS6262 settings

It sometimes happens that after a power failure, your TV settings will change without your knowledge.

It also happens that a child takes your remote control and plays with it before turning off the television.

In both cases, your television may suddenly appear in black and white, or on the contrary, with saturated colors.

Find all the information about How to reset a normal color on PHILIPS TV 65PUS6262 in our articles.

Do not panic ! Here is how to reset a normal color on your PHILIPS TV 65PUS6262 with standard TV settings.

Take the remote control of your PHILIPS TV 65PUS6262, and press “Menu” then select “Setup”, which can also be called “Main Menu”, “System Menu”, “Tool Menu”, “Setup Menu” or “System Setup”.

There, go to “Image”.

You are in the menu that adjusts the image quality of your PHILIPS TV 65PUS6262. Go to the saturation gauge.

You may have to go to a sub-menu called “Colors”.

If your image is in black and white, increase the saturation using the left and right directionnal buttons displayed on your PHILIPS TV 65PUS6262.

If your image is too saturated in color, lower the saturation using the “left” and “right” directional buttons.

Then, if your television is in black and white, go to the “RGB” gauge of your PHILIPS TV 65PUS6262, which can be divided into several gauges like “R1”, “R2”, “G1”, etc… Increase the gauges until the color is obtained.

It is not necessary to adjust these gauges if your television had the colors saturated. Finally, choose the display mode of the image you prefer for your PHILIPS TV 65PUS6262.

You will have the choice between “Normal”, “Cinema”, “Dynamic, and others.” This can help you find the display mode best suited to your tastes.

Capacitors on PHILIPS TV 65PUS6262

Finally, the capacitors may be at fault when the colors of your PHILIPS TV 65PUS6262 are not displayed correctly.

Notably at start-up, an image is displayed with colors that “drool”, then disappears after a little time of use.

If your capacitors work badly when cold, at start-up then, you have to change them. Capacitors are electrical components essential to the start-up of an electronic object.

They are made of an insulation and two metal wires.

Be careful, if you do not feel comfortable with the following procedure, bring yourself closer to an expert who will help you for a reasonable price.

Indeed, this procedure is highly risky as you may get electrocuted. Please unplug the power from your PHILIPS TV 65PUS6262, and ask a professional to do it if you are not an expert about electricity.

To repair the capacitors, you must go to the back of your PHILIPS TV 65PUS6262 television and remove the protective cover if the capacitors are not already visible.

When you see them, have a pair of pliers, and separate them from the TV. Next, place the capacitors, which you can buy for the price of bread in a store, in the right place and with the help of a welder, assemble them to your PHILIPS TV 65PUS6262. Wait a few minutes for the capacitors to cool down.

And now, the colors work again!

To conclude on resetting a normal color on your PHILIPS TV 65PUS6262

We’ve just seen how to put a normal color on your PHILIPS TV 65PUS6262.

However, if you encounter any difficulty, do not hesitate to ask for help from a friend. Or ask for help from a professional who will guide you step by step to do so. We hope it helped fixing your PHILIPS TV 65PUS6262!

How do I unlock my Philips TV?

When TV LOCK is turned on in the TV menu, the prompt to enter the pin will appear on the screen each time when you turn on the TV.

Enter your pin code to view the channels.

If you have forgotten your pin code, enter the universal code ‘8888’.

What are the best color settings for Philips TV?

Set the Contrast to a level of approximately 85, Brightness 45-50, Color to 50-55, sharpness 5-7.

Where is the reset button on a Philips TV?

– Black screen.
– Go to home.
– Step 2: go to settings.
– Go to general settings.
– Factory settings.
– Press OK.

How do I fix the color on my Philips TV?

– Press the menu button.
– Select PICTURE.
– Select COLOR.
– Use button left/right to adjust for best picture.
– Press the ‘MENU’ button to exit the menu.

How to update the software of your Philips Android TV? [2016 and newer]

10 ancillary questions

How do I reset the color on my Philips TV?

– Press the ‘MENU’ button.
– Press the cursor down to select SETTINGS.
– Press cursor right to GENERAL.
– Press the cursor down to select RESET AV SETTINGS.
– Press the ‘OK’ button.
– Press the ‘MENU’ button to exit the menu.

How do I reset my display on my TV?

What causes a TV screen to go black but still have sound?

Backlight issues: LCD screens use a backlight to light up images displayed on the screen.

If the backlight experiences any technical issues, it won’t light the display, and the screen will be black, but the user will still hear sound in the background.

To fix this problem, TV owners need to repair their backlights.

What is the default PIN code for Philips TV?

Note: If you have forgotten your personal 4-digit pin code and when the universal code (0711) is used, the system pin code will reset to the default code (1234) after you have switched off the TV and switched it on again.

Is there a reset button on Philips TV?

Press the ‘MENU’ button. Press the cursor down to select SETTINGS. Press cursor right twice.

Press the cursor down to select RESET AV SETTINGS.

What should I do if my TV screen is black but there is sound?

Replace the HDMI cable as it may have a short or another defect which causes the black screen issue.

Unplug the TV for 5 minutes to attempt a reset. Unplugging the TV will reset the television and clear any temporary issues.

Factory reset of the TV to resolve the issue.

How can I get my TV color back?

First, go to your TV’s settings menu and desaturate its color settings until it gets to black and white.

Calibrate the contrasts and brightness so that both the whites are blacks are distinct.

Turn the sharpness level to the highest point, then down—then added color.

How do I reset my Philips TV without the code?

TV Brand Philips Universal Remote Code
——– ———————————————————-
PHILCO 0807, 0002, 0102, 0502, 0919, 0408, 0109, 0715, 0901, 0402

How do I reset my Philips TV if it wont turn on?

How do I reset the picture on my Philips TV?

– Step 1: go to the home screen.
– Step 2: go to settings.
– Step 3: go to general settings.
– Step 4: find the factory settings.
– Step 5: confirm the reset.

You may also be interested in the following articles:

You still have issues? Our team of experts and passionate could help you, feel free to contact us.