How to reset a normal color on your PHILIPS TV 43PUS6262
You wanted to watch TV when, suddenly, you noticed your PHILIPS TV 43PUS6262 displayed catastrophic colors! Fluorescent, black and white, colors too saturated, or a burr in the colors at startup… These color problems are really unpleasant for your viewer experience.
This is why we have chosen to introduce you in this article how to reset a normal color on your PHILIPS TV 43PUS6262. We will see the problem of connecting the SCART, the possible TV settings, and the quality of the capacitors of your PHILIPS TV 43PUS6262.
SCART on your PHILIPS TV 43PUS6262
The SCART cable is the cable that allows an audio and video connection between your decoder and your television.
It is the cousin of the hdmi cable.
When it is loose or damaged, the quality of the audio or video on your television may drop dramatically.
In particular, your PHILIPS TV 43PUS6262 can have fluorescent colors instead of normal colors.
In this case, first check the connection of your SCART. Unplug it, clean its inputs and outputs, and reconnect it.
If this does not work, you must replace your cable.
You can find them easily in stores.
When you connect the new cable, be careful to turn off the TV and the decoder to avoid handling problems.
Your PHILIPS TV 43PUS6262 settings
It sometimes happens that after a power failure, your TV settings will change without your knowledge.
It also happens that a child takes your remote control and plays with it before turning off the television.
In both cases, your television may suddenly appear in black and white, or on the contrary, with saturated colors.
Find all the information about How to reset a normal color on PHILIPS TV 43PUS6262 in our articles.
Do not panic ! Here is how to reset a normal color on your PHILIPS TV 43PUS6262 with standard TV settings.
Take the remote control of your PHILIPS TV 43PUS6262, and press “Menu” then select “Setup”, which can also be called “Main Menu”, “System Menu”, “Tool Menu”, “Setup Menu” or “System Setup”.
There, go to “Image”.
You are in the menu that adjusts the image quality of your PHILIPS TV 43PUS6262. Go to the saturation gauge.
You may have to go to a sub-menu called “Colors”.
If your image is in black and white, increase the saturation using the left and right directionnal buttons displayed on your PHILIPS TV 43PUS6262.
If your image is too saturated in color, lower the saturation using the “left” and “right” directional buttons.
Then, if your television is in black and white, go to the “RGB” gauge of your PHILIPS TV 43PUS6262, which can be divided into several gauges like “R1”, “R2”, “G1”, etc… Increase the gauges until the color is obtained.
It is not necessary to adjust these gauges if your television had the colors saturated. Finally, choose the display mode of the image you prefer for your PHILIPS TV 43PUS6262.
You will have the choice between “Normal”, “Cinema”, “Dynamic, and others.” This can help you find the display mode best suited to your tastes.
Capacitors on PHILIPS TV 43PUS6262
Finally, the capacitors may be at fault when the colors of your PHILIPS TV 43PUS6262 are not displayed correctly.
Notably at start-up, an image is displayed with colors that “drool”, then disappears after a little time of use.
If your capacitors work badly when cold, at start-up then, you have to change them. Capacitors are electrical components essential to the start-up of an electronic object.
They are made of an insulation and two metal wires.
Be careful, if you do not feel comfortable with the following procedure, bring yourself closer to an expert who will help you for a reasonable price.
Indeed, this procedure is highly risky as you may get electrocuted. Please unplug the power from your PHILIPS TV 43PUS6262, and ask a professional to do it if you are not an expert about electricity.
To repair the capacitors, you must go to the back of your PHILIPS TV 43PUS6262 television and remove the protective cover if the capacitors are not already visible.
When you see them, have a pair of pliers, and separate them from the TV. Next, place the capacitors, which you can buy for the price of bread in a store, in the right place and with the help of a welder, assemble them to your PHILIPS TV 43PUS6262. Wait a few minutes for the capacitors to cool down.
And now, the colors work again!
To conclude on resetting a normal color on your PHILIPS TV 43PUS6262
We’ve just seen how to put a normal color on your PHILIPS TV 43PUS6262.
However, if you encounter any difficulty, do not hesitate to ask for help from a friend. Or ask for help from a professional who will guide you step by step to do so. We hope it helped fixing your PHILIPS TV 43PUS6262!
How do I get the color back on my Philips TV?
– Press the menu button.
– Select PICTURE.
– Select COLOR.
– Use button left/right to adjust for best picture.
– Press the ‘MENU’ button to exit the menu.
What are the best color settings for Philips TV?
Best results are obtained when the room has subdued lighting.
Set the Contrast to a level of approximately 85, Brightness 45-50, Color to 50-55, sharpness 5-7.
How do I manually reset my Philips TV?
– Step 1: go to the home screen.
– Step 2: go to settings.
– Step 3: go to general settings.
– Step 4: find the factory settings.
– Step 5: confirm the reset.
– Black screen.
– Go to home.
– Step 2: go to settings.
– Go to general settings.
– Factory settings.
– Press OK.
How to fix Screen Brightness macro dimming on 4k Philips 5000 UHD TV
6 ancillary questions
How do I calibrate my TV picture?
– Find the Best Picture Mode.
You’ll get the best results by starting in the correct picture mode.
– Use the Warmest Color Temperature Setting.
– Turn Off Unnecessary Picture Features.
– Check Picture Geometry.
– Set Contrast.
– Set Brightness.
– Note Your Settings.
How can I improve the quality of my Philips TV?
– Verify the incoming signal.
– Splitting the signal will make it considerably weaker.
– Connect a signal amplifier if the noise figure value is still over 50.
– Verify your cables and cable-connections.
How do I force restart my Philips TV?
Why isn’t my Philips TV turning on?
Can you calibrate a TV yourself?
Can I calibrate my TV myself? The short answer is yes, you can calibrate your new 4K HDR TV yourself.
There are generally a number of presets built into new TV’s calibration menus.
You’ll often see these options called Cinema, Sports, or Vivid.
How do I get the color back on my Philips Smart TV?
– Press the ‘MENU’ button.
– Press the cursor down to select SETTINGS.
– Press cursor right to GENERAL.
– Press the cursor down to select RESET AV SETTINGS.
– Press the ‘OK’ button.
– Press the ‘MENU’ button to exit the menu.
You may also be interested in the following articles:
- How to stop or activate audiodescription on PHILIPS TV LED 43PUS7303
- How to reset a normal color on PHILIPS TV 32PFS4132
- How to unlock your PHILIPS TV 32PHS4112
You still have issues? Our team of experts and passionate could help you, feel free to contact us.