How to reset a normal color on your PHILIPS TV 32PFS4132
You wanted to watch TV when, suddenly, you noticed your PHILIPS TV 32PFS4132 displayed catastrophic colors! Fluorescent, black and white, colors too saturated, or a burr in the colors at startup… These color problems are really unpleasant for your viewer experience.
This is why we have chosen to introduce you in this article how to reset a normal color on your PHILIPS TV 32PFS4132. We will see the problem of connecting the SCART, the possible TV settings, and the quality of the capacitors of your PHILIPS TV 32PFS4132.
SCART on your PHILIPS TV 32PFS4132
The SCART cable is the cable that allows an audio and video connection between your decoder and your television.
It is the cousin of the hdmi cable.
When it is loose or damaged, the quality of the audio or video on your television may drop dramatically.
In particular, your PHILIPS TV 32PFS4132 can have fluorescent colors instead of normal colors.
In this case, first check the connection of your SCART. Unplug it, clean its inputs and outputs, and reconnect it.
If this does not work, you must replace your cable.
You can find them easily in stores.
When you connect the new cable, be careful to turn off the TV and the decoder to avoid handling problems.
Your PHILIPS TV 32PFS4132 settings
It sometimes happens that after a power failure, your TV settings will change without your knowledge.
It also happens that a child takes your remote control and plays with it before turning off the television.
In both cases, your television may suddenly appear in black and white, or on the contrary, with saturated colors.
Find all the information about How to reset a normal color on PHILIPS TV 32PFS4132 in our articles.
Do not panic ! Here is how to reset a normal color on your PHILIPS TV 32PFS4132 with standard TV settings.
Take the remote control of your PHILIPS TV 32PFS4132, and press “Menu” then select “Setup”, which can also be called “Main Menu”, “System Menu”, “Tool Menu”, “Setup Menu” or “System Setup”.
There, go to “Image”.
You are in the menu that adjusts the image quality of your PHILIPS TV 32PFS4132. Go to the saturation gauge.
You may have to go to a sub-menu called “Colors”.
If your image is in black and white, increase the saturation using the left and right directionnal buttons displayed on your PHILIPS TV 32PFS4132.
If your image is too saturated in color, lower the saturation using the “left” and “right” directional buttons.
Then, if your television is in black and white, go to the “RGB” gauge of your PHILIPS TV 32PFS4132, which can be divided into several gauges like “R1”, “R2”, “G1”, etc… Increase the gauges until the color is obtained.
It is not necessary to adjust these gauges if your television had the colors saturated. Finally, choose the display mode of the image you prefer for your PHILIPS TV 32PFS4132.
You will have the choice between “Normal”, “Cinema”, “Dynamic, and others.” This can help you find the display mode best suited to your tastes.
Capacitors on PHILIPS TV 32PFS4132
Finally, the capacitors may be at fault when the colors of your PHILIPS TV 32PFS4132 are not displayed correctly.
Notably at start-up, an image is displayed with colors that “drool”, then disappears after a little time of use.
If your capacitors work badly when cold, at start-up then, you have to change them. Capacitors are electrical components essential to the start-up of an electronic object.
They are made of an insulation and two metal wires.
Be careful, if you do not feel comfortable with the following procedure, bring yourself closer to an expert who will help you for a reasonable price.
Indeed, this procedure is highly risky as you may get electrocuted. Please unplug the power from your PHILIPS TV 32PFS4132, and ask a professional to do it if you are not an expert about electricity.
To repair the capacitors, you must go to the back of your PHILIPS TV 32PFS4132 television and remove the protective cover if the capacitors are not already visible.
When you see them, have a pair of pliers, and separate them from the TV. Next, place the capacitors, which you can buy for the price of bread in a store, in the right place and with the help of a welder, assemble them to your PHILIPS TV 32PFS4132. Wait a few minutes for the capacitors to cool down.
And now, the colors work again!
To conclude on resetting a normal color on your PHILIPS TV 32PFS4132
We’ve just seen how to put a normal color on your PHILIPS TV 32PFS4132.
However, if you encounter any difficulty, do not hesitate to ask for help from a friend. Or ask for help from a professional who will guide you step by step to do so. We hope it helped fixing your PHILIPS TV 32PFS4132!
How do I change the picture format on my Philips TV?
Press the [Adjust] button on the remote control to access the Adjust Menu. Select [Picture Format] and press the [OK] button to display the list of available picture formats.
Press the cursor [Up] or [Down] to select a format that you feel comfortable with and press the [OK] button.
How do I reset the color on my Philips TV?
– Press the ‘MENU’ button.
– Press the cursor down to select SETTINGS.
– Press cursor right to GENERAL.
– Press the cursor down to select RESET AV SETTINGS.
– Press the ‘OK’ button.
– Press the ‘MENU’ button to exit the menu.
How do I reset my Philips TV?
– Step 1: go to the home screen. Go to the home screen of the TV.
– Step 2: go to settings.
Open the settings menu via the gearwheel on the top right of the screen.
– Step 3: go to general settings.
In the menu on the left, you can see different settings appear.
– Step 4: find the factory settings.
– Step 5: confirm the reset.
What is the best color setting for a Philips TV?
Best results are obtained when the room has subdued lighting.
Set the Contrast to a level of approximately 85, Brightness 45-50, Color to 50-55, sharpness 5-7.
How to Factory Reset Philips Smart TV – Fix it Now
5 ancillary questions
Press the ‘MENU’ button. Press the cursor down to select SETTINGS. Press cursor right twice.
Press the cursor down to select RESET AV SETTINGS.
Why has the picture on my TV gone small?
Check your remote control for picture adjustment functions Look for a button on your TV remote labeled something along the lines of Aspect, Zoom, Format, Stretch, Picture Size, or Picture Mode.
Depending on what kind of television you have in your home, the labeling of the button will differ.
Why isn’t my Philips TV turning on?
How do I reboot my Philips TV?
How do I get my TV picture back to normal size?
– Use your television’s remote control to access the menu.
– From the menu, look for an option for picture adjustment.
– Explore the picture adjustment options that appear.
– Continue searching the picture adjustment menu for any picture size adjustment options.
You may also be interested in the following articles:
- How to reset a normal color on PHILIPS TV 32PFS6402
- How to go online with a PHILIPS TV 43PFS4112
- How to unlock your PHILIPS TV 50PUS6162
You still have issues? Our team of experts and passionate could help you, feel free to contact us.