How to reset a normal color on your GRUNDIG TV LED 49VLX7730WP
You wanted to watch TV when, suddenly, you noticed your GRUNDIG TV LED 49VLX7730WP displayed catastrophic colors! Fluorescent, black and white, colors too saturated, or a burr in the colors at startup… These color problems are really unpleasant for your viewer experience.
This is why we have chosen to introduce you in this article how to reset a normal color on your GRUNDIG TV LED 49VLX7730WP. We will see the problem of connecting the SCART, the possible TV settings, and the quality of the capacitors of your GRUNDIG TV LED 49VLX7730WP.
SCART on your GRUNDIG TV LED 49VLX7730WP
The SCART cable is the cable that allows an audio and video connection between your decoder and your television.
It is the cousin of the hdmi cable.
When it is loose or damaged, the quality of the audio or video on your television may drop dramatically.
In particular, your GRUNDIG TV LED 49VLX7730WP can have fluorescent colors instead of normal colors.
In this case, first check the connection of your SCART. Unplug it, clean its inputs and outputs, and reconnect it.
If this does not work, you must replace your cable.
You can find them easily in stores.
When you connect the new cable, be careful to turn off the TV and the decoder to avoid handling problems.
Your GRUNDIG TV LED 49VLX7730WP settings
It sometimes happens that after a power failure, your TV settings will change without your knowledge.
It also happens that a child takes your remote control and plays with it before turning off the television.
In both cases, your television may suddenly appear in black and white, or on the contrary, with saturated colors.
Find all the information about How to reset a normal color on GRUNDIG TV LED 49VLX7730WP in our articles.
Do not panic ! Here is how to reset a normal color on your GRUNDIG TV LED 49VLX7730WP with standard TV settings.
Take the remote control of your GRUNDIG TV LED 49VLX7730WP, and press “Menu” then select “Setup”, which can also be called “Main Menu”, “System Menu”, “Tool Menu”, “Setup Menu” or “System Setup”.
There, go to “Image”.
You are in the menu that adjusts the image quality of your GRUNDIG TV LED 49VLX7730WP. Go to the saturation gauge.
You may have to go to a sub-menu called “Colors”.
If your image is in black and white, increase the saturation using the left and right directionnal buttons displayed on your GRUNDIG TV LED 49VLX7730WP.
If your image is too saturated in color, lower the saturation using the “left” and “right” directional buttons.
Then, if your television is in black and white, go to the “RGB” gauge of your GRUNDIG TV LED 49VLX7730WP, which can be divided into several gauges like “R1”, “R2”, “G1”, etc… Increase the gauges until the color is obtained.
It is not necessary to adjust these gauges if your television had the colors saturated. Finally, choose the display mode of the image you prefer for your GRUNDIG TV LED 49VLX7730WP.
You will have the choice between “Normal”, “Cinema”, “Dynamic, and others.” This can help you find the display mode best suited to your tastes.
Capacitors on GRUNDIG TV LED 49VLX7730WP
Finally, the capacitors may be at fault when the colors of your GRUNDIG TV LED 49VLX7730WP are not displayed correctly.
Notably at start-up, an image is displayed with colors that “drool”, then disappears after a little time of use.
If your capacitors work badly when cold, at start-up then, you have to change them. Capacitors are electrical components essential to the start-up of an electronic object.
They are made of an insulation and two metal wires.
Be careful, if you do not feel comfortable with the following procedure, bring yourself closer to an expert who will help you for a reasonable price.
Indeed, this procedure is highly risky as you may get electrocuted. Please unplug the power from your GRUNDIG TV LED 49VLX7730WP, and ask a professional to do it if you are not an expert about electricity.
To repair the capacitors, you must go to the back of your GRUNDIG TV LED 49VLX7730WP television and remove the protective cover if the capacitors are not already visible.
When you see them, have a pair of pliers, and separate them from the TV. Next, place the capacitors, which you can buy for the price of bread in a store, in the right place and with the help of a welder, assemble them to your GRUNDIG TV LED 49VLX7730WP. Wait a few minutes for the capacitors to cool down.
And now, the colors work again!
To conclude on resetting a normal color on your GRUNDIG TV LED 49VLX7730WP
We’ve just seen how to put a normal color on your GRUNDIG TV LED 49VLX7730WP.
However, if you encounter any difficulty, do not hesitate to ask for help from a friend. Or ask for help from a professional who will guide you step by step to do so. We hope it helped fixing your GRUNDIG TV LED 49VLX7730WP!
How do I reset my Grundig TV?
Enter the code 9 8 1, the LED will blink 4 times.
The remote is now reset to its factory defaults.
How do I change my TV color from black and white?
Many TV owners have reported that their black and white screen issues resulted from poor picture settings.
An easy fix to this issue is to calibrate the color through the TV settings menu.
Then, navigate through the settings and try to adjust them to fill in color.
How do I get my TV color back to normal?
First, go to your TV’s settings menu and desaturate its color settings until it gets to black and white.
Calibrate the contrasts and brightness so that both the whites are blacks are distinct.
Turn the sharpness level to the highest point, then down—then added color.
Red/Green/Blue/White/Black Screen solve
8 ancillary questions
Why is my LG TV in black and white?
Color settings An easy fix to this issue is to calibrate the color through the TV settings menu.
Then, navigate through the settings and try to adjust them to fill in color.
How do I manually reset my Samsung TV?
– Open Settings, and then select General.
– Select Reset, enter your PIN (0000 is the default), and then select Reset.
– To complete the reset, select OK.
Your TV will restart automatically.
– If these steps don’t match your TV, navigate to Settings, select Support, and then select Self Diagnosis.
How do I fix a distorted picture on my TV?
Look through your TV’s menu system for a separate option called Overscan.
It will likely be near the Picture Size option in the menu, but it could appear anywhere (including the Advanced Settings). Set Overscan to Off or Disable and you’ll finally see the full picture.
How do I get my TV back to color?
Turn the sharpness level to the highest point, then down—then added color.
Next, ensure all wires at the back of the TV and Cable TV box are tightly fitted and plugged into the right inputs.
Doing this might bring colors back to normal.
If you use an antenna, be sure to check it as well.
Why is my color TV showing in black and white?
Normally a black and white picture is caused by incorrect cabling.
This can happen if a composite cable is plugged into a component connection or if a component cable is plugged into a composite connection.
Make sure that the correct cables are connected from the source to the back of the TV.
How do I manually restart my TV?
Turn off the TV. Unplug the television power cord (mains lead) from the electrical outlet. Let the television remain without power for 2 minutes.
Plug the power cord (mains lead) back into the electrical outlet.
How do you restart your TV?
Restarting has the same effect as unplugging your TV power and then plugging it in again.
To restart your TV, navigate to Settings > System > Power and then select System restart.
Highlight Restart, and then press OK to confirm restart.
How do I force restart my TV?
Power Reset Unplug the AC power cord (mains lead).
If the problem persists after step 1, unplug the TV power cord (mains lead) from the electrical outlet.
Then press the power button on the TV and wait for 2 minutes, and plug the power cord (mains lead) back into the electrical outlet.
You may also be interested in the following articles:
- How to stop or activate audiodescription on GRUNDIG TV 22VLE5520WG BLANC 200Hz PPR 12V
- How to go online with a GRUNDIG TV LED 28VLE5500WG
- How to set DTT channels on GRUNDIG TV LED 49VLX7730WP
You still have issues? Our team of experts and passionate could help you, feel free to contact us.