How to connect your THOMSON TV 24HC3111B
You have just acquired a television and you do not know where to start to turn it on and watch your favorite programs? This article is made for you! We wanted to help you to make the connections from your THOMSON TV 24HC3111B television to its peripherals.
To do this, we will explain how to connect your THOMSON TV 24HC3111B TV to a power supply first, your TV set secondly, and your DVD player finally.
Connecting power to your THOMSON TV 24HC3111B TV
To begin with, we’ll explain how to connect your THOMSON TV 24HC3111B TV to a power supply.
This is the simplest manipulation.
In the box containing your TV, you must have been provided with different cables.
Look for one that ends with a plug.
It may be already connected to your TV THOMSON TV 24HC3111B.
If this is not the case, connect the other end of the cable to the “power” input of your TV. Finally, plug the plug into a socket outlet.
All you have to do is turn on the TV with its remote control.
Connect your TV set to your THOMSON TV 24HC3111B
Plugging in your TV decoder to your THOMSON TV 24HC3111B is essential for you to watch channels on your television.
There are two types of decoders: the satellite decoder, and the television decoder, from your service provider.
Connecting the satellite decoder to your THOMSON TV 24HC3111B
There are four connections to make when starting up your satellite decoder.
But before anything else, make sure you have a satellite parable! To get started, find the HDMI cable that came with your decoder.
Find all the information about THOMSON TV 24HC3111B in our articles.
Connect it in “HDMi In” to your TV THOMSON TV 24HC3111B, and “HDMi Out” to your decoder.
Then take the SCART cable to your THOMSON TV 24HC3111B.
It has wide ends and is often blue or black.
And connect your television to your decoder.
Then connect the LSB cable from your satellite parable to your decoder.
Finally, you must connect the power supply of your decoder to a power outlet.
Connecting a provider decoder to your THOMSON TV 24HC3111B
With the TV decoder of a provider, you must have a satellite parable, a DTT antenna, and a box from the supplier.
First, start by connecting the decoder to the box via the supplied ethernet cable.
Next, connect the decoder to the LSB cable of your satellite parable via the “SAT” input.
And connect the decoder to the DTT antenna via the “RF IN” input. Continue by connecting your decoder to the THOMSON TV 24HC3111B with a HDMI cable.
Connect it in “HDMi In” to your TV THOMSON TV 24HC3111B, and “HDMi Out” to your decoder.
Finally, connect the power supply via the “power supply” input of your decoder.
Do not forget to plug the other end into a power outlet!
Plug in your DVD player
To plug in a DVD player to your THOMSON TV 24HC3111B to watch your favorite movies or series, you need to make 3 connections.
To get started, find the HDMI cable supplied with your DVD player.
Connect it in “HDMi In” to your TV THOMSON TV 24HC3111B, and “HDMi Out” to your DVD player.
Then take the scart cable.
It has wide ends and often blue or black.
And connect your DVD player to your decoder.
Finally, you must connect the power supply of your DVD player to a power outlet.
Plug in your amp to your THOMSON TV 24HC3111B
Finally, if you want a better sound from your THOMSON TV 24HC3111B, you can connect your amp to the television. Begin by preparing the speakers of your amp by plugging them into the sound outputs of the amp.
These are the yellow and blue colored outputs.
Then connect the amplifier to your THOMSON TV 24HC3111B TV with the optical cable of your amp.
It plugs into the “Audio optic” or “audio” output of your television. Finally, you must connect the power plug of your amp to a socket.
How to Connect Mobile Phone to Thomson Android TV | Screen Mirroring | Screen Casting | Phone to TV
6 ancillary questions
How do I get my channels back on my TV?
To start, on your TV remote, select “Menu” and then “Settings.” Next, select “Channel Setup” and select “Antenna” or “Air,” depending on your TV.
Make sure you are not on “Cable.” Select “Channel Search” or “Channel Scan.” Keep in mind that steps to perform a channel scan may vary.6 days ago
Why won’t my TV recognize my HDMI?
Make sure the TV is set to the correct video input to receive the HDMI signal.
Most TV remotes have an Input button that cycles from one input to the next. Press the Input button repeatedly until the correct HDMI input is displayed on the TV. Be sure to check which input on the TV you are connecting to.
How do you fix a VIZIO TV when it says no signal?
– Reboot Your Vizio Smart TV.
– Ensure Cables are firmly connected.
– Check Your Input Source.
– Check if Input Source is Hidden.
– Reset your Vizio Smart TV.
Why does my TV say no signal when HDMI is plugged in?
Make sure the TV and source device are both turned on, then disconnect the HDMI cable from one of the devices and then connect it again.
If your TV supports HDMI Enhanced Format, and the source supports 4K, turn on the HDMI Input Enhanced setting to receive high quality 4K signals from the source.
How do I get my VIZIO TV to recognize HDMI?
Move the HDMI cable to a different HDMI port on your TV (if you’re connected to HDMI 1, move the cord to HDMI 2). Once you move the HDMI cord to a different port- you’ll need to press the input button on the remote and switch your TV to the new input.
Why does my Vizio TV say no signal when HDMI is plugged in?
A faulty HDMI cable is one of the most common reasons why your Vizio TV doesn’t pick up input signals from an external device.
However, you’ll need to do a bit of testing to see if the problem is with the following: HDMI wire.
Your source device.
You may also be interested in the following articles:
- How to update THOMSON 65US6006
- Managing parental control on THOMSON 40FD3306 FHD
- How to reset a normal color on THOMSON Thomson 55UB6406 B6 Series – 55′ TV LED
You still have issues? Our team of experts and passionate could help you, feel free to contact us.