How to connect your SHARP LC49CFE4042E – Full HD 49′
You have just acquired a television and you do not know where to start to turn it on and watch your favorite programs? This article is made for you! We wanted to help you to make the connections from your SHARP LC49CFE4042E – Full HD 49′ television to its peripherals.
To do this, we will explain how to connect your SHARP LC49CFE4042E – Full HD 49′ TV to a power supply first, your TV set secondly, and your DVD player finally.
Connecting power to your SHARP LC49CFE4042E – Full HD 49′ TV
To begin with, we’ll explain how to connect your SHARP LC49CFE4042E – Full HD 49′ TV to a power supply.
This is the simplest manipulation.
In the box containing your TV, you must have been provided with different cables.
Look for one that ends with a plug.
It may be already connected to your TV SHARP LC49CFE4042E – Full HD 49′.
If this is not the case, connect the other end of the cable to the “power” input of your TV. Finally, plug the plug into a socket outlet.
All you have to do is turn on the TV with its remote control.
Connect your TV set to your SHARP LC49CFE4042E – Full HD 49′
Plugging in your TV decoder to your SHARP LC49CFE4042E – Full HD 49′ is essential for you to watch channels on your television.
There are two types of decoders: the satellite decoder, and the television decoder, from your service provider.
Connecting the satellite decoder to your SHARP LC49CFE4042E – Full HD 49′
There are four connections to make when starting up your satellite decoder.
But before anything else, make sure you have a satellite parable! To get started, find the HDMI cable that came with your decoder.
Find all the information about SHARP LC49CFE4042E – Full HD 49′ in our articles.
Connect it in “HDMi In” to your TV SHARP LC49CFE4042E – Full HD 49′, and “HDMi Out” to your decoder.
Then take the SCART cable to your SHARP LC49CFE4042E – Full HD 49′.
It has wide ends and is often blue or black.
And connect your television to your decoder.
Then connect the LSB cable from your satellite parable to your decoder.
Finally, you must connect the power supply of your decoder to a power outlet.
Connecting a provider decoder to your SHARP LC49CFE4042E – Full HD 49′
With the TV decoder of a provider, you must have a satellite parable, a DTT antenna, and a box from the supplier.
First, start by connecting the decoder to the box via the supplied ethernet cable.
Next, connect the decoder to the LSB cable of your satellite parable via the “SAT” input.
And connect the decoder to the DTT antenna via the “RF IN” input. Continue by connecting your decoder to the SHARP LC49CFE4042E – Full HD 49′ with a HDMI cable.
Connect it in “HDMi In” to your TV SHARP LC49CFE4042E – Full HD 49′, and “HDMi Out” to your decoder.
Finally, connect the power supply via the “power supply” input of your decoder.
Do not forget to plug the other end into a power outlet!
Plug in your DVD player
To plug in a DVD player to your SHARP LC49CFE4042E – Full HD 49′ to watch your favorite movies or series, you need to make 3 connections.
To get started, find the HDMI cable supplied with your DVD player.
Connect it in “HDMi In” to your TV SHARP LC49CFE4042E – Full HD 49′, and “HDMi Out” to your DVD player.
Then take the scart cable.
It has wide ends and often blue or black.
And connect your DVD player to your decoder.
Finally, you must connect the power supply of your DVD player to a power outlet.
Plug in your amp to your SHARP LC49CFE4042E – Full HD 49′
Finally, if you want a better sound from your SHARP LC49CFE4042E – Full HD 49′, you can connect your amp to the television. Begin by preparing the speakers of your amp by plugging them into the sound outputs of the amp.
These are the yellow and blue colored outputs.
Then connect the amplifier to your SHARP LC49CFE4042E – Full HD 49′ TV with the optical cable of your amp.
It plugs into the “Audio optic” or “audio” output of your television. Finally, you must connect the power plug of your amp to a socket.
How do I connect my Sharp TV to HDMI?
– Locate the HDMI port on the TV.
– Acquire a cable that fits the ports on both devices.
– Connect the cable from one device’s HDMI port to the other.
– Use the Source or Input button on the TV to switch to the port.
– Configure video and audio on the device if needed.
Does Sharp TV have HDMI port?
Less expensive Sharp TVs may have only a VGA or DVI port for connecting to a computer.
High-end Sharp models may have three different connector types: DVI, VGA and HDMI.
How do I connect my Sharp Android TV to my laptop?
Activate the Miracast function on your Sharp TV. Just press the MENU button on your remote > MEDIA > MIRACAST. On your PC, go to the ACTION CENTER then click Connect. Just choose your Sharp TV fro the list, then the mirroring will begin.
How to Connect Sharp Smart TV with Smartphone or Tablet using Bluetooth
8 ancillary questions
How do I reset my HDMI port on my TV?
Why does my TV say no signal when everything is plugged in?
Try connecting your source device to a different HDMI port on your TV, and then change the TV input to match the port used. For satellite or cable connections, check the cable coming into your building and that the connection to your source device (satellite receiver, cable box) is secure and in good condition.
How to connect laptop to Sharp led TV?
Connect one end of the video cable to the DVI, HDMI or VGA video-out port on the PC, and connect the opposite end to the matching input port on the Sharp LCD TV. Note the port name on the TV used to connect to the PC — i.e.
DVI1 or HDMI1.
How do I get the HDMI to work on my Sharp TV?
Press the “Input” button on the TV control panel or remote control, then press the up or down arrow button and select the “Input4” or “Input 5” HDMI input, based on the input used by your device; repeat this step for the other HDMI input if both are used by your device.
How do I connect my laptop to my LED TV with HDMI?
– Locate the HDMI port on the laptop and the HDMI port on the TV.
– Connect one end of the HDMI cable to the laptop.
– Connect the other end of the HDMI cable to the TV.
– Using your TV remote, switch the Input to HDMI and start streaming.
How do I connect my laptop to my old LED TV?
Connect your TV to the laptop with an HDMI cable.
If you have an adapter, plug the HDMI cable into the adapter, and then plug the other end into an HDMI port on the TV.
If not, just plug the HDMI cable right into the HDMI ports on both devices.
What causes TV to say no signal?
A “No Signal”, “No Source”, or “No Input” message will appear on your TV screen if the TV is not receiving a signal from your TV box.
This is often a result of either the TV box being powered off, not being properly connected to the TV, or the TV being set to the wrong input.
How do I connect my laptop to my Sharp TV without HDMI?
– Connect your laptop to your TV with a VGA cable.
– Connect these 2 devices by using a 3.5mm audio cable.
– Turn on laptop and TV.
– Choose PC or RGB input on your TV with the help of the remote.
You may also be interested in the following articles:
- How to go online with a LC55CUF8372ES 55′ LED Ultra HD
- How to reset a normal color on SHARP LC43CFG6452E 43′
- How to connect your SHARP LC43CFG6452E 43′
You still have issues? Our team of experts and passionate could help you, feel free to contact us.