How to connect your SELECLINE LE
You have just acquired a television and you do not know where to start to turn it on and watch your favorite programs? This article is made for you! We wanted to help you to make the connections from your SELECLINE LE television to its peripherals.
To do this, we will explain how to connect your SELECLINE LE TV to a power supply first, your TV set secondly, and your DVD player finally.
Connecting power to your SELECLINE LE TV
To begin with, we’ll explain how to connect your SELECLINE LE TV to a power supply.
This is the simplest manipulation.
In the box containing your TV, you must have been provided with different cables.
Look for one that ends with a plug.
It may be already connected to your TV SELECLINE LE.
If this is not the case, connect the other end of the cable to the “power” input of your TV. Finally, plug the plug into a socket outlet.
All you have to do is turn on the TV with its remote control.
Connect your TV set to your SELECLINE LE
Plugging in your TV decoder to your SELECLINE LE is essential for you to watch channels on your television.
There are two types of decoders: the satellite decoder, and the television decoder, from your service provider.
Connecting the satellite decoder to your SELECLINE LE
There are four connections to make when starting up your satellite decoder.
But before anything else, make sure you have a satellite parable! To get started, find the HDMI cable that came with your decoder.
Find all the information about SELECLINE LE in our articles.
Connect it in “HDMi In” to your TV SELECLINE LE, and “HDMi Out” to your decoder.
Then take the SCART cable to your SELECLINE LE.
It has wide ends and is often blue or black.
And connect your television to your decoder.
Then connect the LSB cable from your satellite parable to your decoder.
Finally, you must connect the power supply of your decoder to a power outlet.
Connecting a provider decoder to your SELECLINE LE
With the TV decoder of a provider, you must have a satellite parable, a DTT antenna, and a box from the supplier.
First, start by connecting the decoder to the box via the supplied ethernet cable.
Next, connect the decoder to the LSB cable of your satellite parable via the “SAT” input.
And connect the decoder to the DTT antenna via the “RF IN” input. Continue by connecting your decoder to the SELECLINE LE with a HDMI cable.
Connect it in “HDMi In” to your TV SELECLINE LE, and “HDMi Out” to your decoder.
Finally, connect the power supply via the “power supply” input of your decoder.
Do not forget to plug the other end into a power outlet!
Plug in your DVD player
To plug in a DVD player to your SELECLINE LE to watch your favorite movies or series, you need to make 3 connections.
To get started, find the HDMI cable supplied with your DVD player.
Connect it in “HDMi In” to your TV SELECLINE LE, and “HDMi Out” to your DVD player.
Then take the scart cable.
It has wide ends and often blue or black.
And connect your DVD player to your decoder.
Finally, you must connect the power supply of your DVD player to a power outlet.
Plug in your amp to your SELECLINE LE
Finally, if you want a better sound from your SELECLINE LE, you can connect your amp to the television. Begin by preparing the speakers of your amp by plugging them into the sound outputs of the amp.
These are the yellow and blue colored outputs.
Then connect the amplifier to your SELECLINE LE TV with the optical cable of your amp.
It plugs into the “Audio optic” or “audio” output of your television. Finally, you must connect the power plug of your amp to a socket.
How do I connect my multimedia player to my TV?
HDMI connection For optimum picture quality, we recommend connecting your player to the TV using an HDMI cable.
If your Blu-ray/DVD player has an HDMI jack (socket), connect it using an HDMI cable.
Be sure to use an authorised HIGH SPEED HDMI cable bearing the HDMI logo.
Vibe 405 5 in 1 universal remote EASY SETUP!
9 ancillary questions
How do I connect my iPhone to my Samsung smart TV?
First, turn on Apple Airplay mode on your TV settings.
This control can be found under general settings.
Access the control center from the top right of your iPhone screen and tap “screen mirroring” positioned close to the brightness control button. Select your Samsung TV from the list of available device.
Why does my TV say no signal when I plug in my DVD player?
Check the input selection of your TV to ensure it’s set for the input connection used by the source device (cable box, satellite, DVD, Blu-ray Disc player). On your TV remote, press the Input, Source, or TV/VIDEO button to toggle you through your input connection options to ensure the correct connection is selected.
How do I connect my phone to my TV using HDMI?
– Locate the HDMI port on the TV and grab the HDMI adapter for your phone.
– Connect the adaptor to your phone then to one end of the HDMI cable.
– Connect the other end of the HDMI cable to the TV.
– Using your TV remote, switch the Input to HDMI and start streaming.
Can you increase the number of HDMI ports on a TV?
As it was just noted, it is possible to add more HDMI ports to your TV by adding an HDMI switch, in fact, we have an entire guide on HDMI switches and their many features and capabilities.
However, if you’re not familiar with an HDMI switch or maybe you want to use something else, we have more information below.
How do I connect my phone to my TV via USB HDMI?
How do I connect my device to my TV?
– WiFi Network.
Make sure that your phone and TV are connected to the same Wi-Fi network.
– TV Settings.
Go to the input menu on your TV and turn on “screen mirroring.”
– Android Settings.
– Select TV.
– Establish Connection.
Why is my computer screen not showing up on my TV?
Try booting up your PC/Laptop with the HDMI cable connected to a TV that is on.
You can try booting up the PC/Laptop while the TV is off and then turn on the TV.
If the above options don’t work, try booting up the PC/Laptop first, and, with the TV on, connect the HDMI cable to both the PC/Laptop and TV.
How do I connect iPhone to smart TV?
– Open Control Center on your iPhone.
– Tap. , then choose your Apple TV or an AirPlay 2-enabled smart TV as the playback destination.
If an AirPlay passcode appears on the TV screen, enter the passcode on your iPhone.
What channel does the TV need to be on for DVD player?
DVD players will display on one of the Input or Auxiliary channels.
Some TVs will label the Input channels based on the type of input, such as “HDMI”, “AV”, and “COMPONENT”. Which input to choose is based on how you connect. For example, if you connect DVD player to TV via HDMI, you should choose HDMI.
You may also be interested in the following articles:
- How to use SELECLINE TV 24S19DC
- How to unlock your SELECLINE 22284
- How to connect headphones to SELECLINE 50S18 4K UHD
You still have issues? Our team of experts and passionate could help you, feel free to contact us.