How to connect your SELECLINE 32285

How to connect your SELECLINE 32285

You have just acquired a television and you do not know where to start to turn it on and watch your favorite programs? This article is made for you! We wanted to help you to make the connections from your SELECLINE 32285 television to its peripherals.

To do this, we will explain how to connect your SELECLINE 32285 TV to a power supply first, your TV set secondly, and your DVD player finally.

Connecting power to your SELECLINE 32285 TV

To begin with, we’ll explain how to connect your SELECLINE 32285 TV to a power supply.

This is the simplest manipulation.

In the box containing your TV, you must have been provided with different cables.

Look for one that ends with a plug.

It may be already connected to your TV SELECLINE 32285.

If this is not the case, connect the other end of the cable to the “power” input of your TV. Finally, plug the plug into a socket outlet.

All you have to do is turn on the TV with its remote control.

Connect your TV set to your SELECLINE 32285

Plugging in your TV decoder to your SELECLINE 32285 is essential for you to watch channels on your television.

There are two types of decoders: the satellite decoder, and the television decoder, from your service provider.

Connecting the satellite decoder to your SELECLINE 32285

There are four connections to make when starting up your satellite decoder.

But before anything else, make sure you have a satellite parable! To get started, find the HDMI cable that came with your decoder.

Find all the information about SELECLINE 32285 in our articles.

Connect it in “HDMi In” to your TV SELECLINE 32285, and “HDMi Out” to your decoder.

Then take the SCART cable to your SELECLINE 32285.

It has wide ends and is often blue or black.

And connect your television to your decoder.

Then connect the LSB cable from your satellite parable to your decoder.

Finally, you must connect the power supply of your decoder to a power outlet.

Connecting a provider decoder to your SELECLINE 32285

With the TV decoder of a provider, you must have a satellite parable, a DTT antenna, and a box from the supplier.

First, start by connecting the decoder to the box via the supplied ethernet cable.

Next, connect the decoder to the LSB cable of your satellite parable via the “SAT” input.

And connect the decoder to the DTT antenna via the “RF IN” input. Continue by connecting your decoder to the SELECLINE 32285 with a HDMI cable.

Connect it in “HDMi In” to your TV SELECLINE 32285, and “HDMi Out” to your decoder.

Finally, connect the power supply via the “power supply” input of your decoder.

Do not forget to plug the other end into a power outlet!

Plug in your DVD player

To plug in a DVD player to your SELECLINE 32285 to watch your favorite movies or series, you need to make 3 connections.

To get started, find the HDMI cable supplied with your DVD player.

Connect it in “HDMi In” to your TV SELECLINE 32285, and “HDMi Out” to your DVD player.

Then take the scart cable.

It has wide ends and often blue or black.

And connect your DVD player to your decoder.

Finally, you must connect the power supply of your DVD player to a power outlet.

Plug in your amp to your SELECLINE 32285

Finally, if you want a better sound from your SELECLINE 32285, you can connect your amp to the television. Begin by preparing the speakers of your amp by plugging them into the sound outputs of the amp.

These are the yellow and blue colored outputs.

Then connect the amplifier to your SELECLINE 32285 TV with the optical cable of your amp.

It plugs into the “Audio optic” or “audio” output of your television. Finally, you must connect the power plug of your amp to a socket.

You may also be interested in the following articles:

You still have issues? Our team of experts and passionate could help you, feel free to contact us.