How to connect your SAMSUNG UE55MU7005
You have just acquired a television and you do not know where to start to turn it on and watch your favorite programs? This article is made for you! We wanted to help you to make the connections from your SAMSUNG UE55MU7005 television to its peripherals.
To do this, we will explain how to connect your SAMSUNG UE55MU7005 TV to a power supply first, your TV set secondly, and your DVD player finally.
Connecting power to your SAMSUNG UE55MU7005 TV
To begin with, we’ll explain how to connect your SAMSUNG UE55MU7005 TV to a power supply.
This is the simplest manipulation.
In the box containing your TV, you must have been provided with different cables.
Look for one that ends with a plug.
It may be already connected to your TV SAMSUNG UE55MU7005.
If this is not the case, connect the other end of the cable to the “power” input of your TV. Finally, plug the plug into a socket outlet.
All you have to do is turn on the TV with its remote control.
Connect your TV set to your SAMSUNG UE55MU7005
Plugging in your TV decoder to your SAMSUNG UE55MU7005 is essential for you to watch channels on your television.
There are two types of decoders: the satellite decoder, and the television decoder, from your service provider.
Connecting the satellite decoder to your SAMSUNG UE55MU7005
There are four connections to make when starting up your satellite decoder.
But before anything else, make sure you have a satellite parable! To get started, find the HDMI cable that came with your decoder.
Find all the information about SAMSUNG UE55MU7005 in our articles.
Connect it in “HDMi In” to your TV SAMSUNG UE55MU7005, and “HDMi Out” to your decoder.
Then take the SCART cable to your SAMSUNG UE55MU7005.
It has wide ends and is often blue or black.
And connect your television to your decoder.
Then connect the LSB cable from your satellite parable to your decoder.
Finally, you must connect the power supply of your decoder to a power outlet.
Connecting a provider decoder to your SAMSUNG UE55MU7005
With the TV decoder of a provider, you must have a satellite parable, a DTT antenna, and a box from the supplier.
First, start by connecting the decoder to the box via the supplied ethernet cable.
Next, connect the decoder to the LSB cable of your satellite parable via the “SAT” input.
And connect the decoder to the DTT antenna via the “RF IN” input. Continue by connecting your decoder to the SAMSUNG UE55MU7005 with a HDMI cable.
Connect it in “HDMi In” to your TV SAMSUNG UE55MU7005, and “HDMi Out” to your decoder.
Finally, connect the power supply via the “power supply” input of your decoder.
Do not forget to plug the other end into a power outlet!
Plug in your DVD player
To plug in a DVD player to your SAMSUNG UE55MU7005 to watch your favorite movies or series, you need to make 3 connections.
To get started, find the HDMI cable supplied with your DVD player.
Connect it in “HDMi In” to your TV SAMSUNG UE55MU7005, and “HDMi Out” to your DVD player.
Then take the scart cable.
It has wide ends and often blue or black.
And connect your DVD player to your decoder.
Finally, you must connect the power supply of your DVD player to a power outlet.
Plug in your amp to your SAMSUNG UE55MU7005
Finally, if you want a better sound from your SAMSUNG UE55MU7005, you can connect your amp to the television. Begin by preparing the speakers of your amp by plugging them into the sound outputs of the amp.
These are the yellow and blue colored outputs.
Then connect the amplifier to your SAMSUNG UE55MU7005 TV with the optical cable of your amp.
It plugs into the “Audio optic” or “audio” output of your television. Finally, you must connect the power plug of your amp to a socket.
Why is my Samsung TV not picking up HDMI?
Check the power button on the connected devices.
Check that the connected device is actually powered on, and properly connected to your Samsung TV, and if you connected to a Laptop or PC make sure that it is not in Sleep or Hibernate mode and it is set to Portrait mode.
How do I set up my Samsung smart TV for the first time?
First, make sure your phone and TV are signed into the same wireless network. Open the SmartThings app on your phone.
Next, tap ADD NOW on your phone and enter the PIN displayed on your TV.
Tap DONE and wait until your TV registers your Samsung account.
Where do I connect my HDMI cable to my Samsung TV?
The HDMI port will be labeled ARC on the back of the TV or One Connect Box.
Samsung TV: How to Enable HDMI-CEC-ARK-eARK (Anynet+) AU8000 Series
7 ancillary questions
How do I get my Samsung TV to recognize my device?
– 1 Press the power button on the connected device.
– 2 Select the correct source on your TV.
– 3 Disconnect and reconnect the HDMI cable.
– 4 Try a different HDMI cable.
– 5 Connect a different external device to see if it works.
Why won’t my Samsung phone connect to my TV with HDMI?
Disconnect and reconnect the HDMI cable.
Disconnect the HDMI cable from the back of the TV and the external device.
Then reconnect it firmly to the external device first, then connect it to your TV.
If it still doesn’t work, try the cable in a different port. Don’t forget to select the new source.
Why is my TV suddenly not connecting to Wi-Fi?
Restart your smart TV and Wi-Fi router A restart will refresh the settings on your smart TV without erasing any of your data. Just unplug your smart TV, wait 30 seconds, then plug it back in.
To restart your Wi-Fi router, unplug it, wait 30 seconds, then plug it back in too.
Do I need to create a Samsung account for smart TV to download apps?
Once you’ve located the app you want, select Install. Before you can download apps on your Samsung TV, you need to have a Samsung account.
Where do I connect my HDMI to my TV?
Connect one end of a universal HDMI cable into the HDTV Adapter.
2. Connect the other end to the HDMI port on your TV.
If your TV has multiple HDMI ports, you may use any of the ports.
Can I set up Samsung TV without Samsung account?
A Samsung account is required to use certain services or apps on your TV. For example, if you want to rent or purchase movies or shows on your TV, you’ll need your Samsung account.
To sign into your Samsung account manually, select Sign In, and then select the ID Field.
You may also be interested in the following articles:
- How to update SAMSUNG 55NU7105 TV LED
- How to set DTT channels on SAMSUNG UE55MU6205
- How to unlock your SAMSUNG UE65NU7305
You still have issues? Our team of experts and passionate could help you, feel free to contact us.