How to connect your PHILIPS TV 50PUS6162
You have just acquired a television and you do not know where to start to turn it on and watch your favorite programs? This article is made for you! We wanted to help you to make the connections from your PHILIPS TV 50PUS6162 television to its peripherals.
To do this, we will explain how to connect your PHILIPS TV 50PUS6162 TV to a power supply first, your TV set secondly, and your DVD player finally.
Connecting power to your PHILIPS TV 50PUS6162 TV
To begin with, we’ll explain how to connect your PHILIPS TV 50PUS6162 TV to a power supply.
This is the simplest manipulation.
In the box containing your TV, you must have been provided with different cables.
Look for one that ends with a plug.
It may be already connected to your TV PHILIPS TV 50PUS6162.
If this is not the case, connect the other end of the cable to the “power” input of your TV. Finally, plug the plug into a socket outlet.
All you have to do is turn on the TV with its remote control.
Connect your TV set to your PHILIPS TV 50PUS6162
Plugging in your TV decoder to your PHILIPS TV 50PUS6162 is essential for you to watch channels on your television.
There are two types of decoders: the satellite decoder, and the television decoder, from your service provider.
Connecting the satellite decoder to your PHILIPS TV 50PUS6162
There are four connections to make when starting up your satellite decoder.
But before anything else, make sure you have a satellite parable! To get started, find the HDMI cable that came with your decoder.
Find all the information about PHILIPS TV 50PUS6162 in our articles.
Connect it in “HDMi In” to your TV PHILIPS TV 50PUS6162, and “HDMi Out” to your decoder.
Then take the SCART cable to your PHILIPS TV 50PUS6162.
It has wide ends and is often blue or black.
And connect your television to your decoder.
Then connect the LSB cable from your satellite parable to your decoder.
Finally, you must connect the power supply of your decoder to a power outlet.
Connecting a provider decoder to your PHILIPS TV 50PUS6162
With the TV decoder of a provider, you must have a satellite parable, a DTT antenna, and a box from the supplier.
First, start by connecting the decoder to the box via the supplied ethernet cable.
Next, connect the decoder to the LSB cable of your satellite parable via the “SAT” input.
And connect the decoder to the DTT antenna via the “RF IN” input. Continue by connecting your decoder to the PHILIPS TV 50PUS6162 with a HDMI cable.
Connect it in “HDMi In” to your TV PHILIPS TV 50PUS6162, and “HDMi Out” to your decoder.
Finally, connect the power supply via the “power supply” input of your decoder.
Do not forget to plug the other end into a power outlet!
Plug in your DVD player
To plug in a DVD player to your PHILIPS TV 50PUS6162 to watch your favorite movies or series, you need to make 3 connections.
To get started, find the HDMI cable supplied with your DVD player.
Connect it in “HDMi In” to your TV PHILIPS TV 50PUS6162, and “HDMi Out” to your DVD player.
Then take the scart cable.
It has wide ends and often blue or black.
And connect your DVD player to your decoder.
Finally, you must connect the power supply of your DVD player to a power outlet.
Plug in your amp to your PHILIPS TV 50PUS6162
Finally, if you want a better sound from your PHILIPS TV 50PUS6162, you can connect your amp to the television. Begin by preparing the speakers of your amp by plugging them into the sound outputs of the amp.
These are the yellow and blue colored outputs.
Then connect the amplifier to your PHILIPS TV 50PUS6162 TV with the optical cable of your amp.
It plugs into the “Audio optic” or “audio” output of your television. Finally, you must connect the power plug of your amp to a socket.
How do I manually connect my Philips TV to WiFi?
How do I connect my Philips TV to HDMI?
– Press the “Power” buttons on your computer and Philips TV to turn them off.
– Connect a HDMI cable to your computer’s HDMI port.
– Insert the plug on the other end of the cable into an open HDMI port on your Philips TV.
How do I find the TV code for my Philips TV?
You can find the MediaConnect code from within the TV’s menu screen. Press [Menu] on the remote.
Then select [Setup]>[Software]>[MediaConnect code].
The code will be displayed on the right side of the screen.
Philips TV No Signal – Fix it Now
8 ancillary questions
How do I reset my Wi-Fi on my smart TV?
How do I wirelessly connect my TV to WiFi?
– Get the tab with your WiFi’s name and password from your router.
– Using the remote, on your TV, find the Menu, then Network Settings, then Set Up a New Connection.
– Enter the WiFi name and password from the tab you grabbed earlier.
– You should be all set!
Why is my internet working on my phone but not my TV?
Try connecting to a different network. Switch on hotspot on your phone, and then connect to that network via your Smart TV’s network settings menu.
If the Smart TV can access the Internet over other networks, the issue is likely to be in the router or Internet connection itself.
Can I get rid of my cable box with a smart TV?
You won’t need that cable box anymore, but you will need some kind of streaming device to watch services such as Netflix, Hulu, Amazon Prime Video and HBO Max.
Maybe the app is built into your smart TV, maybe into your game console, or maybe you have to buy a new streaming device like a Roku or Apple TV.
Why is my TV not connecting to my WiFi?
Power reset your modem/router Reconnect the power cable to your modem/router and ensure it’s turned on. Wait until the device is finished making its connection to the internet and your network. Check your TV for the internet connection issues you were experiencing.
How do I get regular TV on my Samsung smart TV?
– You can press the Source button on your remote and then select the source labeled TV.
– You can press Home, navigate to Menu, and then select Connected Devices.
From here you can select which source your TV is connected to.
How do I connect my iPhone to my Philips Smart TV?
On your Philips TV browser, open the web version of AirDroid Cast.
You will see a QR code and a Cast code on the TV screen. Next, open the AirDroid Cast app on your Apple device and scan the QR code shown on the Philips TV screen or type the code.
Lastly, choose the Apple device as the “Casting Source.”Nov 2, 2022
Why can’t I connect wirelessly to my TV?
There are several solutions to the TV WiFi connection issue.
Simply enter the right password and try connecting your TV to your network again by turning it off and then back on.
Make sure you are on the right channel and that your network has enough capacity if you’re utilizing a WiFi connection from a router.
You may also be interested in the following articles:
- How to go online with a PHILIPS TV 65PUS6412
- How to stop or activate audiodescription on PHILIPS TV 32PHS4112
- How to download apps on PHILIPS TV LED 49PUS8303
You still have issues? Our team of experts and passionate could help you, feel free to contact us.