How to connect your PANASONIC TX55FX700E
You have just acquired a television and you do not know where to start to turn it on and watch your favorite programs? This article is made for you! We wanted to help you to make the connections from your PANASONIC TX55FX700E television to its peripherals.
To do this, we will explain how to connect your PANASONIC TX55FX700E TV to a power supply first, your TV set secondly, and your DVD player finally.
Connecting power to your PANASONIC TX55FX700E TV
To begin with, we’ll explain how to connect your PANASONIC TX55FX700E TV to a power supply.
This is the simplest manipulation.
In the box containing your TV, you must have been provided with different cables.
Look for one that ends with a plug.
It may be already connected to your TV PANASONIC TX55FX700E.
If this is not the case, connect the other end of the cable to the “power” input of your TV. Finally, plug the plug into a socket outlet.
All you have to do is turn on the TV with its remote control.
Connect your TV set to your PANASONIC TX55FX700E
Plugging in your TV decoder to your PANASONIC TX55FX700E is essential for you to watch channels on your television.
There are two types of decoders: the satellite decoder, and the television decoder, from your service provider.
Connecting the satellite decoder to your PANASONIC TX55FX700E
There are four connections to make when starting up your satellite decoder.
But before anything else, make sure you have a satellite parable! To get started, find the HDMI cable that came with your decoder.
Find all the information about PANASONIC TX55FX700E in our articles.
Connect it in “HDMi In” to your TV PANASONIC TX55FX700E, and “HDMi Out” to your decoder.
Then take the SCART cable to your PANASONIC TX55FX700E.
It has wide ends and is often blue or black.
And connect your television to your decoder.
Then connect the LSB cable from your satellite parable to your decoder.
Finally, you must connect the power supply of your decoder to a power outlet.
Connecting a provider decoder to your PANASONIC TX55FX700E
With the TV decoder of a provider, you must have a satellite parable, a DTT antenna, and a box from the supplier.
First, start by connecting the decoder to the box via the supplied ethernet cable.
Next, connect the decoder to the LSB cable of your satellite parable via the “SAT” input.
And connect the decoder to the DTT antenna via the “RF IN” input. Continue by connecting your decoder to the PANASONIC TX55FX700E with a HDMI cable.
Connect it in “HDMi In” to your TV PANASONIC TX55FX700E, and “HDMi Out” to your decoder.
Finally, connect the power supply via the “power supply” input of your decoder.
Do not forget to plug the other end into a power outlet!
Plug in your DVD player
To plug in a DVD player to your PANASONIC TX55FX700E to watch your favorite movies or series, you need to make 3 connections.
To get started, find the HDMI cable supplied with your DVD player.
Connect it in “HDMi In” to your TV PANASONIC TX55FX700E, and “HDMi Out” to your DVD player.
Then take the scart cable.
It has wide ends and often blue or black.
And connect your DVD player to your decoder.
Finally, you must connect the power supply of your DVD player to a power outlet.
Plug in your amp to your PANASONIC TX55FX700E
Finally, if you want a better sound from your PANASONIC TX55FX700E, you can connect your amp to the television. Begin by preparing the speakers of your amp by plugging them into the sound outputs of the amp.
These are the yellow and blue colored outputs.
Then connect the amplifier to your PANASONIC TX55FX700E TV with the optical cable of your amp.
It plugs into the “Audio optic” or “audio” output of your television. Finally, you must connect the power plug of your amp to a socket.
How do I connect my Panasonic TV to HDMI?
Acquire a cable that fits the ports on both devices.
Connect the cable from one device’s HDMI port to the other.
Use the Source or Input button on the TV to switch to the port. Configure video and audio on the device if needed.
How do I connect my Panasonic TV?
– On your Panasonic remote, press MENU.
– Select Network > Network connection.
– You will then be prompted that it is searching for Wi-Fi networks.
– Choose your router’s Wi-Fi name from the list then press OK on the remote.
– Select your wireless router’s Security Type.
How do I connect my Panasonic TV to power cable?
Panasonic TX 49FX700E
7 ancillary questions
How do I turn my Panasonic TV back on after a power outage?
– Unplug every cable from your TV.
– Ensure the socket your TV was plugged into has power.
– Press the power button on your TV for at least one minute.
– Plug the TV back in.
– Plug one input device.
– Turn your TV on.
How do I reset my Panasonic remote control?
Try a remote reset by removing the batteries and pressing every button on the remote twice.
Re-insert the batteries.
To operate other devices, such as changing channels when using Cable or Satellite boxes, or operating non-Panasonic Blu-ray players, use the remote supplied with the device.
Where is the power switch on a Panasonic TV?
On Panasonic TVs, the control buttons are usually on the right side in the back. Go to the left side of your TV screen and look behind it.
The power on/off button is indicated by the I/O sign.
Why won’t my TV recognize my HDMI?
The HDMI cable you’re using might be malfunctioning or too old to perform adequately.
Try a different HDMI cable to see if it solves your issue.
Alternatively, you can use the first HDMI cable to connect a different video device to check if the video device is malfunctioning.
How do I set up digital channels on my Panasonic TV?
Press the [▼Down Arrow] arrow on the TV remote until “Auto program” is highlighted. Press the [OK] button on the TV remote.
Press the [OK] button on the TV remote to select “All Channels” to start scanning.
Select the appropriate scan mode between the following “All channels”, “Analog only”, “Digital only” .
How do I connect my Panasonic TV to cable?
– Connect HDMI OUT on satellite receiver / digital cable box to HDMI IN on TV.
Image varies by model.
– After connection is made, put the TV in HDMI Video mode by pressing the “TV/VIDEO” or “Input” button on the remote control.
How do I force my Panasonic TV to reset?
– 1 | Press Menu On Your Remote.
Take your Panasonic remote control and simply click ‘menu’.
– 2 | Go To Setup. Select setup on the left of the TV screen.
– 3 | Select System.
– 4 | Click Factory Defaults.
– 5 | Select Yes.
– Locate the reset button on the TV.
– Press the reset button.
– Turn the TV back on.
You may also be interested in the following articles:
- How to unlock your PANASONIC TV OLED TX-65FZ950E
- How to download apps on PANASONIC 65FX780 4K UHD Smart TV
- How to reset sound and audio settings on PANASONIC FX780
You still have issues? Our team of experts and passionate could help you, feel free to contact us.