How to connect your LG 55UJ670V LED 4K UHD HDR

You have just acquired a television and you do not know where to start to turn it on and watch your favorite programs? This article is made for you! We wanted to help you to make the connections from your LG 55UJ670V LED 4K UHD HDR television to its peripherals.

To do this, we will explain how to connect your LG 55UJ670V LED 4K UHD HDR TV to a power supply first, your TV set secondly, and your DVD player finally.

Connecting power to your LG 55UJ670V LED 4K UHD HDR TV

To begin with, we’ll explain how to connect your LG 55UJ670V LED 4K UHD HDR TV to a power supply.

This is the simplest manipulation.

In the box containing your TV, you must have been provided with different cables.

Look for one that ends with a plug.

It may be already connected to your TV LG 55UJ670V LED 4K UHD HDR.

If this is not the case, connect the other end of the cable to the “power” input of your TV. Finally, plug the plug into a socket outlet.

All you have to do is turn on the TV with its remote control.

Connect your TV set to your LG 55UJ670V LED 4K UHD HDR

Plugging in your TV decoder to your LG 55UJ670V LED 4K UHD HDR is essential for you to watch channels on your television.

There are two types of decoders: the satellite decoder, and the television decoder, from your service provider.

Connecting the satellite decoder to your LG 55UJ670V LED 4K UHD HDR

There are four connections to make when starting up your satellite decoder.

But before anything else, make sure you have a satellite parable! To get started, find the HDMI cable that came with your decoder.

Find all the information about LG 55UJ670V LED 4K UHD HDR in our articles.

Connect it in “HDMi In” to your TV LG 55UJ670V LED 4K UHD HDR, and “HDMi Out” to your decoder.

Then take the SCART cable to your LG 55UJ670V LED 4K UHD HDR.

It has wide ends and is often blue or black.

And connect your television to your decoder.

Then connect the LSB cable from your satellite parable to your decoder.

Finally, you must connect the power supply of your decoder to a power outlet.

Connecting a provider decoder to your LG 55UJ670V LED 4K UHD HDR

With the TV decoder of a provider, you must have a satellite parable, a DTT antenna, and a box from the supplier.

First, start by connecting the decoder to the box via the supplied ethernet cable.

Next, connect the decoder to the LSB cable of your satellite parable via the “SAT” input.

And connect the decoder to the DTT antenna via the “RF IN” input. Continue by connecting your decoder to the LG 55UJ670V LED 4K UHD HDR with a HDMI cable.

Connect it in “HDMi In” to your TV LG 55UJ670V LED 4K UHD HDR, and “HDMi Out” to your decoder.

Finally, connect the power supply via the “power supply” input of your decoder.

Do not forget to plug the other end into a power outlet!

Plug in your DVD player

To plug in a DVD player to your LG 55UJ670V LED 4K UHD HDR to watch your favorite movies or series, you need to make 3 connections.

To get started, find the HDMI cable supplied with your DVD player.

Connect it in “HDMi In” to your TV LG 55UJ670V LED 4K UHD HDR, and “HDMi Out” to your DVD player.

Then take the scart cable.

It has wide ends and often blue or black.

And connect your DVD player to your decoder.

Finally, you must connect the power supply of your DVD player to a power outlet.

Plug in your amp to your LG 55UJ670V LED 4K UHD HDR

Finally, if you want a better sound from your LG 55UJ670V LED 4K UHD HDR, you can connect your amp to the television. Begin by preparing the speakers of your amp by plugging them into the sound outputs of the amp.

These are the yellow and blue colored outputs.

Then connect the amplifier to your LG 55UJ670V LED 4K UHD HDR TV with the optical cable of your amp.

It plugs into the “Audio optic” or “audio” output of your television. Finally, you must connect the power plug of your amp to a socket.

Source: Comment utiliser votre lg 49um7100 tv 4k hdr

LG 55UJ670V 55″ 4K SMART TV: Unboxing, Setting Up and Review

9 ancillary questions

How do I get my TV back on cable?

Run a coaxial cable from the wall jack to the TV’s input.

Turn on your smart TV. Use the smart TV remote control to switch to the “TV” input.

You may have to go into your TV’s settings to find the “Tuner mode” section and switch it to “Cable.” Then, you’ll need to scan for channels to see what’s on.

Remove this source – Source: https://www.wikihow.com › … › Television

How do I get my LG TV to turn on HDMI?

Turn on the connected device.

The TV will automatically switch to the corresponding HDMI input.

If it does not change automatically, press the INPUT button and select the input.

Remove this source – Source: https://www.lg.com › microsites › tv › simplink-function

How do I get my LG Smart TV back to cable?

Turn on the TV. Press the Home button on your remote, then locate the Input icon in the top-right of the screen.

If you do not have a Home button on your remote, press the Settings button instead (icon not shown on all remotes). From the Input menu, choose the input you want to use.

Remove this source – Source: https://www.lg.com › Home › Support

How do I change my TV from HDMI mode?

Use the SOURCE or INPUT button on your TV or remote to select the HDMI port.

You’ll usually have to press it a few times until you reach the right port number.

Once you reach the correct source, you should see the device’s image on the screen.

Remove this source – Source: https://www.thehealthyjournal.com › how-do-i-get-my-t…

How do I change my LG TV from HDMI to one button?

– Turn on your LG TV and open Home Screen.
– Open the Inputs menu on the top right corner, using your remote control.
– You’ll now see a list of all connected devices.
– Select the input you want to use.
– Confirm.

Remove this source – Source: https://www.techjunkie.com › Electronics › TV