How to connect your LG 49UJ630V

How to connect your LG 49UJ630V

You have just acquired a television and you do not know where to start to turn it on and watch your favorite programs? This article is made for you! We wanted to help you to make the connections from your LG 49UJ630V television to its peripherals.

To do this, we will explain how to connect your LG 49UJ630V TV to a power supply first, your TV set secondly, and your DVD player finally.

Connecting power to your LG 49UJ630V TV

To begin with, we’ll explain how to connect your LG 49UJ630V TV to a power supply.

This is the simplest manipulation.

In the box containing your TV, you must have been provided with different cables.

Look for one that ends with a plug.

It may be already connected to your TV LG 49UJ630V.

If this is not the case, connect the other end of the cable to the “power” input of your TV. Finally, plug the plug into a socket outlet.

All you have to do is turn on the TV with its remote control.

Connect your TV set to your LG 49UJ630V

Plugging in your TV decoder to your LG 49UJ630V is essential for you to watch channels on your television.

There are two types of decoders: the satellite decoder, and the television decoder, from your service provider.

Connecting the satellite decoder to your LG 49UJ630V

There are four connections to make when starting up your satellite decoder.

But before anything else, make sure you have a satellite parable! To get started, find the HDMI cable that came with your decoder.

Find all the information about LG 49UJ630V in our articles.

Connect it in “HDMi In” to your TV LG 49UJ630V, and “HDMi Out” to your decoder.

Then take the SCART cable to your LG 49UJ630V.

It has wide ends and is often blue or black.

And connect your television to your decoder.

Then connect the LSB cable from your satellite parable to your decoder.

Finally, you must connect the power supply of your decoder to a power outlet.

Connecting a provider decoder to your LG 49UJ630V

With the TV decoder of a provider, you must have a satellite parable, a DTT antenna, and a box from the supplier.

First, start by connecting the decoder to the box via the supplied ethernet cable.

Next, connect the decoder to the LSB cable of your satellite parable via the “SAT” input.

And connect the decoder to the DTT antenna via the “RF IN” input. Continue by connecting your decoder to the LG 49UJ630V with a HDMI cable.

Connect it in “HDMi In” to your TV LG 49UJ630V, and “HDMi Out” to your decoder.

Finally, connect the power supply via the “power supply” input of your decoder.

Do not forget to plug the other end into a power outlet!

Plug in your DVD player

To plug in a DVD player to your LG 49UJ630V to watch your favorite movies or series, you need to make 3 connections.

To get started, find the HDMI cable supplied with your DVD player.

Connect it in “HDMi In” to your TV LG 49UJ630V, and “HDMi Out” to your DVD player.

Then take the scart cable.

It has wide ends and often blue or black.

And connect your DVD player to your decoder.

Finally, you must connect the power supply of your DVD player to a power outlet.

Plug in your amp to your LG 49UJ630V

Finally, if you want a better sound from your LG 49UJ630V, you can connect your amp to the television. Begin by preparing the speakers of your amp by plugging them into the sound outputs of the amp.

These are the yellow and blue colored outputs.

Then connect the amplifier to your LG 49UJ630V TV with the optical cable of your amp.

It plugs into the “Audio optic” or “audio” output of your television. Finally, you must connect the power plug of your amp to a socket.

How do I start my LG TV for the first time?

Setting up your TV. Press the Smart button on the included remote to access the Smart Home menu. From there, the LG Smart TV will take you through a setup wizard. Follow the onscreen prompts to connect to your home’s Wi-Fi and your cable box. Once connected, you’ll be able to access online videos, apps and more.

Why is my LG TV showing no signal?

An LGLGLG is a leading manufacturer of consumer and commercial products ranging from TVs, home appliances, air solutions, monitors, service robots, automotive components and its premium LG SIGNATURE and intelligent LG ThinQ brands are familiar names world over.https://www.lg.com › global › investor-relations-company-infoCompany Information | Investor Relations | LG Global TV may display a no signal message because of poor signal strength, an incorrect TV input, or due to a connected device not being powered on.

How do I get my LG TV to start on HDMI?

LG TV 2020 Series All Settings > Connection > Device Connection Settings > Auto Device Detection > On > SIMPLINKSIMPLINKConsumer Electronics Control (CEC) is a feature of HDMI designed to control HDMI connected devices by using only one remote controller; so, individual CEC enabled devices can command and control each other without user intervention, for up to 15 devices.https://en.wikipedia.org › wiki › Consumer_Electronics_ControlConsumer Electronics Control – Wikipedia (HDMI-CEC) > On Auto Power Sync > On.

How do I connect my LG TV to cable?

LG 49UJ630V 49″ 4K Ultra HD Smart Television Review (input lag tested)

7 ancillary questions

Why won’t my TV recognize my HDMI?

The HDMI cable you’re using might be malfunctioning or too old to perform adequately.

Try a different HDMI cable to see if it solves your issue.

Alternatively, you can use the first HDMI cable to connect a different video device to check if the video device is malfunctioning.

Why does my TV say no signal but the cable box is on?

If your television doesn’t display a signal but your cable box is on, you must restart the cable box. Before reconnecting the cable box, remove it from the wall outlet for at least 60 seconds.

If the problem persists, examine the HDMI port for a loose connection.

How can I reboot my TV?

Turn off the TV. Unplug the television power cord (mains lead) from the electrical outlet. Let the television remain without power for 2 minutes.

Plug the power cord (mains lead) back into the electrical outlet.

How do I change the default source on my TV?

Under Settings, select Video Input.

In the Video Input menu, select Configured Devices.

In the Configured Devices screen, highlight and select the input you want to use as default. From the options that appear on the screen select Make Default TV device.

How do I switch my LG TV back to cable?

Turn on the TV. Press the Home button on your remote, then locate the Input icon in the top-right of the screen.

If you do not have a Home button on your remote, press the Settings button instead (icon not shown on all remotes). From the Input menu, choose the input you want to use.

How do I get my LG TV to recognize my cable box?

Press the Smart button on the included remote to access the Smart Home menu. From there, the LG Smart TV will take you through a setup wizard. Follow the onscreen prompts to connect to your home’s Wi-Fi and your cable box. Once connected, you’ll be able to access online videos, apps and more.

How do I get my TV to turn on HDMI?

Make sure the TV is set to the correct video input to receive the HDMI signal.

Most TV remotes have an Input button that cycles from one input to the next. Press the Input button repeatedly until the correct HDMI input is displayed on the TV. Be sure to check which input on the TV you are connecting to.

You may also be interested in the following articles:

You still have issues? Our team of experts and passionate could help you, feel free to contact us.