How to connect your LG 32LJ500U

You have just acquired a television and you do not know where to start to turn it on and watch your favorite programs? This article is made for you! We wanted to help you to make the connections from your LG 32LJ500U television to its peripherals.

To do this, we will explain how to connect your LG 32LJ500U TV to a power supply first, your TV set secondly, and your DVD player finally.

Connecting power to your LG 32LJ500U TV

To begin with, we’ll explain how to connect your LG 32LJ500U TV to a power supply.

This is the simplest manipulation.

In the box containing your TV, you must have been provided with different cables.

Look for one that ends with a plug.

It may be already connected to your TV LG 32LJ500U.

If this is not the case, connect the other end of the cable to the “power” input of your TV. Finally, plug the plug into a socket outlet.

All you have to do is turn on the TV with its remote control.

Connect your TV set to your LG 32LJ500U

Plugging in your TV decoder to your LG 32LJ500U is essential for you to watch channels on your television.

There are two types of decoders: the satellite decoder, and the television decoder, from your service provider.

Connecting the satellite decoder to your LG 32LJ500U

There are four connections to make when starting up your satellite decoder.

But before anything else, make sure you have a satellite parable! To get started, find the HDMI cable that came with your decoder.

Find all the information about LG 32LJ500U in our articles.

Connect it in “HDMi In” to your TV LG 32LJ500U, and “HDMi Out” to your decoder.

Then take the SCART cable to your LG 32LJ500U.

It has wide ends and is often blue or black.

And connect your television to your decoder.

Then connect the LSB cable from your satellite parable to your decoder.

Finally, you must connect the power supply of your decoder to a power outlet.

Connecting a provider decoder to your LG 32LJ500U

With the TV decoder of a provider, you must have a satellite parable, a DTT antenna, and a box from the supplier.

First, start by connecting the decoder to the box via the supplied ethernet cable.

Next, connect the decoder to the LSB cable of your satellite parable via the “SAT” input.

And connect the decoder to the DTT antenna via the “RF IN” input. Continue by connecting your decoder to the LG 32LJ500U with a HDMI cable.

Connect it in “HDMi In” to your TV LG 32LJ500U, and “HDMi Out” to your decoder.

Finally, connect the power supply via the “power supply” input of your decoder.

Do not forget to plug the other end into a power outlet!

Plug in your DVD player

To plug in a DVD player to your LG 32LJ500U to watch your favorite movies or series, you need to make 3 connections.

To get started, find the HDMI cable supplied with your DVD player.

Connect it in “HDMi In” to your TV LG 32LJ500U, and “HDMi Out” to your DVD player.

Then take the scart cable.

It has wide ends and often blue or black.

And connect your DVD player to your decoder.

Finally, you must connect the power supply of your DVD player to a power outlet.

Plug in your amp to your LG 32LJ500U

Finally, if you want a better sound from your LG 32LJ500U, you can connect your amp to the television. Begin by preparing the speakers of your amp by plugging them into the sound outputs of the amp.

These are the yellow and blue colored outputs.

Then connect the amplifier to your LG 32LJ500U TV with the optical cable of your amp.

It plugs into the “Audio optic” or “audio” output of your television. Finally, you must connect the power plug of your amp to a socket.

Source: Comment utiliser votre lg 32lm550b

How do I start my LG TV for the first time?

Setting up your TV. Press the Smart button on the included remote to access the Smart Home menu. From there, the LG Smart TV will take you through a setup wizard. Follow the onscreen prompts to connect to your home’s Wi-Fi and your cable box. Once connected, you’ll be able to access online videos, apps and more.

Remove this source – Source: https://www.bestbuy.com › … › Geek Squad Tech Tips

How do I get my LG TV to start on HDMI?

LG TV 2020 Series All Settings > Connection > Device Connection Settings > Auto Device Detection > On > SIMPLINKSIMPLINKConsumer Electronics Control (CEC) is a feature of HDMI designed to control HDMI connected devices by using only one remote controller; so, individual CEC enabled devices can command and control each other without user intervention, for up to 15 devices.https://en.wikipedia.org › wiki › Consumer_Electronics_ControlConsumer Electronics Control – Wikipedia (HDMI-CEC) > On Auto Power Sync > On.

Remove this source – Source: https://en.wikipedia.org › wiki › Consumer_Electronics_Control

How do you connect a LG to a TV?

– Open your laptop [Settings] menu and navigate to [Systems] > [Display]. NOTE.
– Scroll down to [Multiple Displays] and select [Connect to a Wireless Display].
– Select the TV you wish to share your screen with.
– Click [Accept] on your LG TV to allow the request.

Remove this source – Source: https://www.lg.com › … › SUPPORT › Register a Product

Why is my LG TV showing no signal?

An LGLGLG is a leading manufacturer of consumer and commercial products ranging from TVs, home appliances, air solutions, monitors, service robots, automotive components and its premium LG SIGNATURE and intelligent LG ThinQ brands are familiar names world over.https://www.lg.com › global › investor-relations-company-infoCompany Information | Investor Relations | LG Global TV may display a no signal message because of poor signal strength, an incorrect TV input, or due to a connected device not being powered on.

Remove this source – Source: https://www.lg.com › global › investor-relations-company-info

How to scan digital TV and analog TV on LG 55UJ63 Smart TV

5 ancillary questions

What do I need to connect a smart TV?

This is actually usually very easy, simply plug you Ethernet cable into one of the RJ45 sockets on the rear of your internet modem/ router and then plug the other end into your TV.

That should be it with no need to change any settings on your TV.

I recommend using a fulling wired Ethernet cable for best possible speed.

Remove this source – Source: https://www.smartaerials.co.uk › blog › best-way-to-con…

Why does my TV say no signal when HDMI is plugged in?

Make sure the TV and source device are both turned on, then disconnect the HDMI cable from one of the devices and then connect it again.

If your TV supports HDMI Enhanced Format, and the source supports 4K, turn on the HDMI Input Enhanced setting to receive high quality 4K signals from the source.

Remove this source – Source: https://www.sony.com › electronics › support › articles

How do I reboot my LG TV?

Instead of unplugging your TV just to restart it, all you have to do is press and hold the volume down and power keys simultaneously until the device reboots.

This will take about 11-12 seconds.

Then release the keys when you see the LG bootup logo.

Remove this source – Source: https://comic-cons.xyz › Dr.

Fixgood

How do I start my smart TV for the first time?

– Turn On your TV.
– Select your desired language.
– On the Privacy policy, Select Enable Smart TV.
– On the country screen select your country.
– If any interactive Application privacy policy appears, select Agree.
– On the Auto Program screen, select OK to set up the channels on your TV.

Remove this source – Source: https://www.fullspecs.net › tv-guide › smart-tv-guide-21

How do I connect my phone to my LG TV?

1 Press the HOME button on your LG remote and select AirPlay from the LG Menu.

Make sure your TV and mobile device are connected to the same Wi-Fi Network.

Airplay must be setup and turned on in order to complete screen share.3 days ago

Remove this source – Source: https://www.lg.com › … › SUPPORT › Register a Product

You may also be interested in the following articles:

You still have issues? Our team of experts and passionate could help you, feel free to contact us.